x440-3 is a hot (with heat) setup in a v3 cat with the 3910 motor on 6s. Those who have attempted that prop in a v3 have had a lot of post on here and other forums explaining what they have done to their boat, because it was running hot or overheating with it. They recommend dual rudder pickups and to re-route the water hose plumbing. There is a reason they are putting this on their boat and that's to try to keep it just under the bleeding edge of what you are experiencing (ESC Thermal shut off). You're ESC will be fine because it was manufactured to shut down instead of burn up, but the motor could have damage. If you want to run in the 50 mph range put a 3831 with a 1814 on 4s and you will be just fine. If you put 6s to it then I suggest to set your boat up loose (not wet) and run the x440-3 every other pass about 3/4 throttle and you will be in the low 60's and running cool enough for your stuff to survive. The OEM motor can't do this without adding some aftermarket cooling parts.
The videos need to be uploaded to a host such as YouTube to be posted here.
Last edited by MADRCER; 02-02-2018 at 12:45 AM.
TFL Zonda (124mph), Miss Geico Zelos 36 (108mph), Veles 29 (91mph), Zelos Twin 36 (90mph), Miss Geico 29v3 (83.5mph), Sonicwake 36 V2 (83mph), Blackjack 42 (81mph), TFL Pursuit (79mph), UL-19 (75mph), Sonicwake 36 (73mph), Motley Crew (47.5mph), AquaCraft Rescue 17
Bookmarks