hi, will below ose geico strut with lead Teflon give no sloppage for the flex stub, need to know!
https://www.offshoreelectrics.com/pr...od=ose-1390-v3
hi, will below ose geico strut with lead Teflon give no sloppage for the flex stub, need to know!
https://www.offshoreelectrics.com/pr...od=ose-1390-v3
No "sloppage" with it while using the OSE upgrade flex for me, but you might need heat shrink on it where it meets the stuffing tube if you have grease seepage in that area.
TFL Zonda (124mph), Miss Geico Zelos 36 (108mph), Veles 29 (91mph), Zelos Twin 36 (90mph), Miss Geico 29v3 (83.5mph), Sonicwake 36 V2 (83mph), Blackjack 42 (81mph), TFL Pursuit (79mph), UL-19 (75mph), Sonicwake 36 (73mph), Motley Crew (47.5mph), AquaCraft Rescue 17
I have it on my V3 Miss Geico with stock flex cable. The new strut took up any play there was.
The lead teflon bushing in the OSE strut is definitely a better fit than the brass bushing in the stock strut. It's not that expensive to just buy, but you also have the option to drill out the brass bushing in your stock strut and press in a new lead teflon one.
Vac-U-Tug Jr (13mph)
Bookmarks