Managed to get some painting done between rainy days in Michigan. Just hardware store enamel `Miller High Life' vinyl transfers and lots of clear!
Managed to get some painting done between rainy days in Michigan. Just hardware store enamel `Miller High Life' vinyl transfers and lots of clear!
~~~~~~~~`Mach 5 racing'~~~~~~~~~~~~
****2008/9 MMEU LSO, 2008 LSH CHAMP****
~~~~~~~70 MPH Club Member!~~~~~~~~~
Finished up the color this weekend. Decals then finish clear coat come next. Took a couple hours to mask the boat for each color, well worth it!
~~~~~~~~`Mach 5 racing'~~~~~~~~~~~~
****2008/9 MMEU LSO, 2008 LSH CHAMP****
~~~~~~~70 MPH Club Member!~~~~~~~~~
looking good
Vac-U-Tug Jr (13mph)
Beautiful work Ken
Finally had a 20 minute window yesterday when sun decided to come out to do the clearcoat. Paint work is complete!
Last edited by K.R.Joye; 05-30-2019 at 10:32 AM.
~~~~~~~~`Mach 5 racing'~~~~~~~~~~~~
****2008/9 MMEU LSO, 2008 LSH CHAMP****
~~~~~~~70 MPH Club Member!~~~~~~~~~
That's beautiful!!
Dang. I think you better just hang that up on the wall and keep it as a showpiece. Are you really planning on putting that in the water with us yahoos!?!??!
Its been 1 1/2 years since I started this project. A scratch built composite 8th Scale Hydroplane. OMG it feels so good to be done! Bench tested the Plett yesterday(goosebumps), testing starts this week.
~~~~~~~~`Mach 5 racing'~~~~~~~~~~~~
****2008/9 MMEU LSO, 2008 LSH CHAMP****
~~~~~~~70 MPH Club Member!~~~~~~~~~
Luv this one!
Last edited by K.R.Joye; 06-10-2019 at 10:57 AM.
~~~~~~~~`Mach 5 racing'~~~~~~~~~~~~
****2008/9 MMEU LSO, 2008 LSH CHAMP****
~~~~~~~70 MPH Club Member!~~~~~~~~~
I don't think the water in the pond is good enough for this boat.
Thanks buddy
~~~~~~~~`Mach 5 racing'~~~~~~~~~~~~
****2008/9 MMEU LSO, 2008 LSH CHAMP****
~~~~~~~70 MPH Club Member!~~~~~~~~~
Hey guys christened the `Miller' at my favorite test site today. The GM Tech Center 22 acre west pond(pic) with fellow engineers watching me.
Boat got right up on plane and ran 4 laps in 2" chop before the coupler loosened up. It went straight great and ran really smooth over the chop at approx. 3/4 throttle for the break in run. No heat on the equipment, propping up next time out.
Can already tell this boat is going to be a vast improvement over my past scales.
Last edited by K.R.Joye; 06-12-2019 at 07:49 AM.
~~~~~~~~`Mach 5 racing'~~~~~~~~~~~~
****2008/9 MMEU LSO, 2008 LSH CHAMP****
~~~~~~~70 MPH Club Member!~~~~~~~~~
AMAZING build! You inspired me to finally order my hull kit. What does the finished hull weigh?
Sweet ride Ken! Congratulations!
MODEL BOAT RACER
IMPBA President
District 13 Director 2011- present
IMPBA National Records Director 2009-2019
IMPBA 19887L CD
NAMBA 1169
Mike The boat weighs 18lbs RTR w/10S1P Giant Power 6000s. Congrats on your decision to order your scale!
Hey Doug thx for the support buddy!
Absolutely superb!!!
Congrats on the initial test run.
See the danger. THEN DO IT ANYWAY!!!
https://forums.offshoreelectrics.com/...hp?albumid=319
https://forums.offshoreelectrics.com/...hp?albumid=320
That is one nice looking boat there!! Nice build and finish work. It's a beauty. Now the fun parts of getting to see it out on the water, running and adjusting stuff for peak performance. We never stop tinkering and trying new stuff. Love the boat, man. Love the hobby.
Update; I ran the Miller again a few days later after sorting my coupler issue. The tapped grub screw holes needed to be run through a couple times to seat better. Boat ran awesome with a X450/3 did 6 high speed laps and brought it in. Motor, battery & ESC temps were real good an no leaks I'm am really happy. I'll start checking for top speed with my old Geko in upcoming testing and report out.
~~~~~~~~`Mach 5 racing'~~~~~~~~~~~~
****2008/9 MMEU LSO, 2008 LSH CHAMP****
~~~~~~~70 MPH Club Member!~~~~~~~~~
Bookmarks