Muy lindo proceso de construcción:
http://www.offshore-rc.com/forum/ind...erfox-36-twin/
Soon I will try to see what it does in the water. Later I will cut the supports and see what can emerge as an improvement.
haha, yes, I'm not very familiar with electronics. I have basic knowledge. And I'm sleeping very little ...
The Silverfox comes with the mount for dual motors. Mount the motors into the mount, then align your tubes for the flex shaft before gluing in the mount. That should help with the setup because you can keep taking out the mount with the motors attached to get tubes lined up the way you like it.
Added in some Carbon fiber supports for the large canopy and mounted the battery trays. Should be ready to try when the water turns back to liquid form
Great work. Oh you doing a single , makes life easier. There is so much room to pop batteries in and out. Nice
I'm still not decided if I'm going to use a double or single configuration in the blue hull.
The black hull should clear that tray if I want to place the 4082 motors. I do not think it does.
27332263_1788452268123173_3110677741663550755_n.jpg
26907746_1788127458155654_7832314119706301919_n.jpg
20180127_132613.jpg
20180127_144739.jpg
Last edited by golfito; 02-15-2018 at 07:49 PM.
I uploaded the photos again. I have batteries of 6s, engines 4082 and two variators 150a or one of 240a.
I will try to install the parts that I have. I ordered a set of x442 and x442r in case I decided on a double motor. And an x440 / 3 if I go for just one.
I am finishing up my boat today as it is raining outside. What KV are you running on the 4082? I am also going 4082 on mine with the 440/3 prop. I'll post some pictures in a little.
I still have not decided if I'm still only 4082, 1500kv and x440 / 3 or two 4082 of 2200kv and x442 / x442r. I'm going to use only the blue hull (clean hull). I'm waiting for some parts.
I have thought 6s for the double configuration of 2200kv. It is what I have available.
All buttoned up. Going to try the 4082 1900kv with the 440/3 for some testing on 6s 180amp ESC. Made a windshield for aesthetics as the canopy is pretty large and this kind of helps out.
Hello, as it was with Silver Fox.
I just finished reinforcements on the boats. They increased 8.45 oz in total after the coatings in the hull and the hatch.
31959615_1829514160683650_997637331387154432_n.jpg
31949773_1829513970683669_2392433698839461888_n.jpg
31956886_1829514127350320_5188115237080924160_n.jpg
31958367_1829514097350323_7726018571997806592_n.jpg
31542922_1829514037350329_3415491004621389824_n.jpg
Carbon fiber and reinforcement work looks fantastic excellent job.
Thank you.
I wanted to know how it went with the ship and that configuration.
I haven’t had it out yet to test, I was messing with a Genesis that I did, but I will keep you posted when I get a chance to run it.
I'm going to start assembling my silver fox with a single motor ...
The unit with two motors was assembled and tested for the first time.
Very happy with these hulls.
40617620_1917550231880042_8760562961086414848_n.jpg
40556873_1917550031880062_7683801852386738176_n.jpg
Haven’t had the chance to even test mine, sitting on the shelf collecting dust
Bookmarks