If this is your first visit, be sure to check out the FAQ by clicking the link above. To post questions and to view pictures, you will have to register by clicking here register : Important, Please make sure to add oseforum@offshoreelectrics.com to your safe senders email list. Otherwise the activation email may go in your spam box. Or to start viewing/reading the forum without having to register, select the forum that you want to visit from the selection below.

Welcome to The OffshoreElectrics (OSE) RC Electric Boating Forum!

Please take a moment to read this. OSE is a tight knit community of like minded rc boating enthusiasts who value "on topic" and clean discussions. You are currently viewing our forum as a "guest". A guest will not be able to post questions or view pictures and videos.

Registration is fast, simple and absolutely free. Please click here to Join now.

By joining our free community you will have access to post topics, create your own image gallery to share with everyone, communicate privately with other members (PM), respond to polls, upload content and access many other special features.

If you have any problems with the registration process or your account login, please contact us by clicking here.

Results 1 to 30 of 38

Thread: twin outboards on deep vhull advice

Thread Tools
- Show Printable Version
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

01-22-2018, 09:20 PM #32
Old School

View Profile

View Forum Posts

Private Message

Senior Member
Join Date

Aug 2017

Location

OZ

Posts

686
This shows a dual Proboat layout on a 900 mm hull. Later testing showed the props to be about 10 mm too low. Once adjusted upwards the boat planed well with no ill effects. The builder has several videos of the boat.

https://www.youtube.com/watch?v=XrQX...PIdIm1fF5q9sAT

Outboard adjustment on the prototype

https://www.youtube.com/watch?v=B-NbRae8iw0

Last edited by Old School; 01-22-2018 at 09:35 PM.

Reply With Quote