ED
As I stated above the weight of four X 6-S packs in the stock location without rearranging and rebuilding the interior of the boat could be a big problem.
The weight of four X 4-S packs compared to four X 6-S packs is over 2.5 lb. more weight.
When you add that 2.5 lb. to the stock location, the hull is now too nose heavy, and will run like a piece of ----, and you will not be happy.
Here are the two pack makes that I would recommend (Both graphene).
https://www.mojoracingproducts.com/c...70c-140c-lipos
https://www.offshoreelectrics.com/pr...rod=rev-ys5000
Stay with the 5000mAp packs.
Are you looking to race on the oval, or just sport running and some ZIP-ZIP for all out speed?
The 8-S setup with some tuning and props should get you over 70MPH no problem for all out speed.
Run time should be about 3 min. all out.
Also as I stated before, reinforcing the interior and the seam of the hull would be a good idea.
Larry
Bookmarks