Results 1 to 22 of 22

Thread: neu 1527 1.5y and a neu 1521 1.5d 8mm shaft

  1. #1
    Join Date
    Jun 2012
    Location
    ny
    Posts
    1,135

    Default neu 1527 1.5y and a neu 1521 1.5d 8mm shaft

    Hello, looking for a good deal on both, anyone

  2. #2
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,384

    Default

    I have 1521 1.5D. I'm not back home until after Christmas. Might make a trip back next week but only if very necessary.

    It's clean and I ran it once in Michigan in 2014 for p mono. Bought it on the swap shop about the winter before.

    Keep me in mind if you aren't in a rush or don't find one in USA.
    Nortavlag Bulc

  3. #3
    Join Date
    Jun 2012
    Location
    ny
    Posts
    1,135

    Default

    Quote Originally Posted by ray schrauwen View Post
    I have 1521 1.5D. I'm not back home until after Christmas. Might make a trip back next week but only if very necessary.

    It's clean and I ran it once in Michigan in 2014 for p mono. Bought it on the swap shop about the winter before.

    Keep me in mind if you aren't in a rush or don't find one in USA.
    Ray, will do, how much you want for it? is it a 8mm shaft? thanks

  4. #4
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,384

    Default

    Yes, 8mm shaft and asking $130us shipped.
    Nortavlag Bulc

  5. #5
    Join Date
    Jun 2012
    Location
    ny
    Posts
    1,135

    Default

    Quote Originally Posted by ray schrauwen View Post
    Yes, 8mm shaft and asking $130us shipped.
    when you get back home please post pictures of motor and as long as bearings are good I will most likely take it

  6. #6
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,384

    Default

    Ok. Will do.
    Nortavlag Bulc

  7. #7
    Join Date
    Aug 2008
    Location
    CO
    Posts
    7,080

    Default

    I'd like to be next in line for the 1527 1.5y If Meangene does not take it. Thx.
    "Look good doin' it"
    See the fleet

  8. #8
    Join Date
    Jun 2012
    Location
    ny
    Posts
    1,135

    Default

    Quote Originally Posted by Jesse J View Post
    I'd like to be next in line for the 1527 1.5y If Meangene does not take it. Thx.
    the one offered by Ray is a 1521

  9. #9
    Join Date
    Aug 2008
    Location
    CO
    Posts
    7,080

    Default

    Ok. I'll start my own thread. Didn't mean to jump your thread.
    Jesse
    "Look good doin' it"
    See the fleet

  10. #10
    Join Date
    Jun 2012
    Location
    ny
    Posts
    1,135

    Default

    Quote Originally Posted by Jesse J View Post
    Ok. I'll start my own thread. Didn't mean to jump your thread.
    Jesse
    thats fine no problem

  11. #11
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,384

    Default

    Quote Originally Posted by meangenesracing View Post
    when you get back home please post pictures of motor and as long as bearings are good I will most likely take it
    Here is the thread I bought the motor from Don Ferrete. Looks same as this. Uploading new picks asap. Paid $150us plus shipping.
    https://forums.offshoreelectrics.com...highlight=1521

    No cooler, needed for my other 1521. Plugs are HXT150s that I will remove since few run them.

    Only one set of heats in p mono since I bought it.
    Nortavlag Bulc

  12. #12
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,384

  13. #13
    Join Date
    Jun 2012
    Location
    ny
    Posts
    1,135

    Default

    Ray, thats the old style motor correct ? do you know the build date? also whats the spacing on mounting holes in front? bolt size please. want to make sure it will work with my mount

  14. #14
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,384

    Default

    4mm holes with 25mm spacing. If you read the link i posted it has as much info as I know. Don had Neu redo the motor. To me it looks like it has a new field. This motor has the lighter detent compared to the older ones. Date on motor is 10/6/08. No idea if it's month day year or vice versa. Anyway it's been refurbished at Neu more recently and if I knew it was this nice I wouldn't have asked only 130 for it.

    That said if it's not for your needs I completely understand. Thank you.
    Nortavlag Bulc

  15. #15
    Join Date
    Jun 2012
    Location
    ny
    Posts
    1,135

    Default

    Quote Originally Posted by ray schrauwen View Post
    4mm holes with 25mm spacing. If you read the link i posted it has as much info as I know. Don had Neu redo the motor. To me it looks like it has a new field. This motor has the lighter detent compared to the older ones. Date on motor is 10/6/08. No idea if it's month day year or vice versa. Anyway it's been refurbished at Neu more recently and if I knew it was this nice I wouldn't have asked only 130 for it.

    That said if it's not for your needs I completely understand. Thank you.
    Ray, I think I can make this work with my mount if not I'll get a different mount. PM me your paypal and I will het you paid by Monday night if that works for you thanks, geno

  16. #16
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,384

    Default

    That works. Just make sure it's going to work for you.

    Let me know to take off the connectors when you send PayPal.
    Nortavlag Bulc

  17. #17
    Join Date
    Jun 2012
    Location
    ny
    Posts
    1,135

    Default

    paypal sent

  18. #18
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,384

    Default

    Received. Packing.
    Nortavlag Bulc

  19. #19
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,384

    Default

    Shipped. Should be approx. 5 days or so.

    Send tracking in PM.
    Nortavlag Bulc

  20. #20
    Join Date
    Jun 2012
    Location
    ny
    Posts
    1,135

    Default

    motor arrived today looks great and works great. Thanks Ray

  21. #21
    Join Date
    Jun 2012
    Location
    ny
    Posts
    1,135

    Default

    still looking for a 1527 1.5y

  22. #22
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,384

    Default

    Quote Originally Posted by meangenesracing View Post
    motor arrived today looks great and works great. Thanks Ray
    Great, thank you.
    Nortavlag Bulc

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •