Results 1 to 6 of 6

Thread: SV27 Rebirth

  1. #1
    Join Date
    May 2008
    Location
    WA
    Posts
    44

    Default SV27 Rebirth

    Hello!

    I have a question that I can't really answer after looking on here for some time. I have had this boat for about 10 years. When I bought it, it did not use Lipo batteries. I would like to start running it again. I have 2S batteries for my truck that I could use for the boat. Should I just buy a new ESC and use the same motor and hardware for now? It is still basically stock and the hull is in good condition. I think there is a hairline crack in the transom, but that's it.

    Please let me know your thoughts. Thank you for the help.

  2. #2
    Join Date
    Aug 2008
    Location
    CO
    Posts
    7,080

    Default

    I would just get a couple 2s battery packs with 5000mah and at least 30c discharge designed for boats or helis.
    If the esc still works, there's no need to replace it. You can use the boat packs in your truck, but using car packs in a boat may damage them.
    "Look good doin' it"
    See the fleet

  3. #3
    Join Date
    May 2008
    Location
    WA
    Posts
    44

    Default

    OK! Thanks! Does the existing ESC have a cut-off, or would I need to just time the batteries basically! Again, thanks for the reply.

  4. #4
    Join Date
    Jun 2014
    Location
    IL
    Posts
    1,516

    Default

    Time the batteries, there is no LVC for batteries on the factory ESC
    NEVER SATISFIED RACING
    Fine Design 32 V-Hull 4082+6s

  5. #5
    Join Date
    Apr 2007
    Location
    On
    Posts
    7,279

    Default

    I remember the 1st time I put LiPos in my SV 27...hit the throttle and it flipped over backwards....that was the start of a lot of crazy fun times with that boat.

  6. #6
    Join Date
    May 2008
    Location
    WA
    Posts
    44

    Default

    That's too funny!! Thank you!

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •