Results 1 to 30 of 43

Thread: Hobbyking Libero mods

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 09-27-2017, 10:11 PM #1
    Old School
    Old School is offline Senior Member
    Join Date
    Aug 2017
    Location
    OZ
    Posts
    686

    Default Hobbyking Libero mods

    For a bit more to get me more deeply interested in fast electrics I have purchased a Hobbyking Libero shovelnose. As I await its arrival I need to sort out a few details.

    Firstly, this is the ESC I hope to use as I want to use this type of ESC on a current 70 cm mono project and wanted commonality.

    https://hobbyking.com/en_us/turnigy-...r-cooling.html

    Secondly, being overly cautious, I wanted a dual pickup rudder, however, after trawling through over 700 rudders on eBay the only dual pickup rudders available have a different pivot mechanism and so a direct replacement rudder to the existing hardware is apparently not possible. Any thoughts please. I could opt for a through hull pickup as an option. I wanted separate motor/esc cooling paths.

    Edit: I found this rudder at RC Boat Bitz. This looks like it could be modified to fit or might be direct install. It is 100 mm deep. I could trim a little from the lower edge if too deep. I am only looking at the rudder itself and not the rudder arm mount bracket.

    http://www.rcboatbitz.com/index.php?...oducts_id=1445

    http://www.rcboatbitz.com/index.php?...oducts_id=1955
    Last edited by Old School; 09-27-2017 at 10:44 PM. Reason: Further information
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules