I make those parts by the way
I make those parts by the way
Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
"Follow someone's footsteps and you will always be a step behind"
Awesome.. what a small world. I'm sure when everything arrives I'll have a few questions for you regarding the installation.
Ok cool, I'll consult the Oracle and see what I can find.
Will do, thanks
Hi all
My hull finally arrived today from Switzerland :-)
I'll start the build in a week or two when I have a little time off.
20171201_204847.jpg
Just got my C5009 hull and hardware in as well. I won't be starting my build for a while, so I'll be watching your progress for ideas.
Vac-U-Tug Jr (13mph)
Cool, we can compare notes.
How are the new HPR hulls (the new guys who took over HPR) are they of the similar or same caliber of that of Hans?
Vac-U-Tug Jr (13mph)
I'm not sure how the new ones compare. I'll thake some closeup pics this evening.
The quality looks good to me. I've never seen an older older one in the flesh though.20171205_204229.jpg
Here is one I'm building for a customer
fr_3528.jpgfr_3532.jpgfr_3531.jpgfr_3533.jpgfr_3530 (1).jpg
Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
"Follow someone's footsteps and you will always be a step behind"
Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
"Follow someone's footsteps and you will always be a step behind"
@ fweasel, you sure you got a 5009?? ( also see an uneven transition from the tunnel to the bottom of the rudder stand-off)
Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
"Follow someone's footsteps and you will always be a step behind"
the yellow is an original 115 HPR from Hans, and the white the 5009 also from hans, same size but different hull type...
ORG HP 5009.jpgORG HP 115.jpg
Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
"Follow someone's footsteps and you will always be a step behind"
The hulls have not changed they are different hulls
Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
"Follow someone's footsteps and you will always be a step behind"
They are both great, would say the 5009 is more for straight and the 115 handle a bit better
Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
"Follow someone's footsteps and you will always be a step behind"
Can't find them on the site last I looked, and the site doesn't even load for me now. How much/where?
Here's a shot of the bottom of my hull at the rear. My rudder standoff to tunnel transition is smooth/level. My hull looks exactly like photos of a Bulletproof C5009 that KBB built down to the locations of the hatch bolts and water inlet/outlets.
2017-12-06 17.01.26.jpg
Last edited by fweasel; 12-06-2017 at 06:19 PM.
Vac-U-Tug Jr (13mph)
If you need hydraulic or any other parts you can hit me up
Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
"Follow someone's footsteps and you will always be a step behind"
Hi Kent
I'm going to send you a PM.
Thanks
Brad.
Brad if easier catch me on FB nata2run
Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
"Follow someone's footsteps and you will always be a step behind"
Bookmarks