If the prop is an Octura, then detongue it to the shape of an M445, it has thinner blades so will be more efficient and draw less amps. A X442 detongued or a prather 215 would likely drop amp draw and give better run times also. Definitely change the motor connectors, go to 5.5 or 6mm. You should also be only running your batteries down to 20% max. Set the LVC to 3.0 volts should see you right, but always check and time your runs if necessary.
NZMPBA 2013, 2016 Open Electric Champion. NZMPBA 2016 P Offshore Champion.
2016 SUHA Q Sport Hydro Hi Points Champion.
BOPMPBC Open Mono, Open Electric Champion.
Bookmarks