Originally Posted by
CraigP
Here's a pic of the 3/-6" strut with the 5/16" OD C'bore in there... The seal is off to the side, resting on the bottom of the boat, by the water lines. This is the first iteration, I used a small aluminum plate as a seal retainer. I'm going to do a circlip next..
Craig
I have a question?
In your picture - why is your strut so deep?
Bottom of the strut should be about 1/4" plus the depth of the sponson bottom from the bottom of the hull.
By looking at your picture, the strut is down way past that, the unsharpened portion is showing down past the bottom of the hull.
What type of prop do you run on that hull ( submerged ) ?
Larry
Past NAMBA- P Mono -1 Mile Race Record holder
Past NAMBA- P Sport -1 Mile Race Record holder
Bump & Grind Racing Props -We Like Em Smooth & Wet
Bookmarks