Results 1 to 16 of 16

Thread: seaking 180a esc or swordfish 220 and leopard 4082

  1. #1

    Default seaking 180a esc or swordfish 220 and leopard 4082

    hey guys i am rebuilding a boat of mine and am looking for either the hobby wing 180a esc or a swordfish 220 aswell as a leopard 4082, let me know if anyone has anything!!!

    Thanks
    Every one knows the best part about building a boat is SANDING!!!! Just kidding

  2. #2
    Join Date
    May 2017
    Location
    OK
    Posts
    1,024

    Default

    What motor kv and voltage?

  3. #3

    Default

    range of 1600kv to 2000kv
    Every one knows the best part about building a boat is SANDING!!!! Just kidding

  4. #4

    Default

    bump
    Every one knows the best part about building a boat is SANDING!!!! Just kidding

  5. #5
    Join Date
    Sep 2009
    Location
    FL
    Posts
    1,478

    Default

    Say I have a T-180 V3 I'll let go of for $75 shipped

  6. #6

    Default

    is it used, how many runs?
    Every one knows the best part about building a boat is SANDING!!!! Just kidding

  7. #7
    Join Date
    Sep 2009
    Location
    FL
    Posts
    1,478

    Default

    yea its used, has about a dozen runs on it. was working good when I took it out. I have a leo 4074 2200kv motor also.

  8. #8

    Default

    would you take 60 im not super fond of the turnigy 180s have had bad experiences with them but it will work with my setup
    Every one knows the best part about building a boat is SANDING!!!! Just kidding

  9. #9

    Default

    I have a brand new unopened leopard 4082 2000kv motor i can let go of. It was purchased brand new from OSE. Here is a link to it (https://www.offshoreelectrics.com/pr...?prod=leo-4082)
    Again i have a 2000Kv version. Please let me know if you are interested.

  10. #10

    Default

    dang i ended up buying a motor last night... i am still looking for a esc though
    Every one knows the best part about building a boat is SANDING!!!! Just kidding

  11. #11

    Default

    I have a Brand New Turnigy AquaStar 200Amp ESC that i would let go of for 100$ plus 10$ for flatrate priority shipping.

    Here is a link to the product
    https://hobbyking.com/en_us/turnigy-...rless-esc.html

  12. #12

    Default

    dang i would like the ability to run 4s.
    Every one knows the best part about building a boat is SANDING!!!! Just kidding

  13. #13

    Default

    I have a 2s/6s 220/300 amp swordfish pro + rsc with data logging and bec has 6 runs on it very good condition works great $100.00 plus $10.00 for shipping

    SOLD !!!!

    14198.jpg
    20171126_150019.jpg
    Last edited by sweed_61; 12-07-2017 at 01:32 PM.

  14. #14

    Default

    I have a like new Seaking 180 and programming box.
    I have only used it on some short test runs.
    Less than 10 minute total. Still have box and paperwork.
    I would be happy with $100 for both or even make me an offer.
    Thx,
    Ken
    Ken Haines / Wave Blasters of Florida
    Thunder Power RC.
    NEU Motors / Rico Racing/ Castle Creations

  15. #15

    Default

    Rule of thumb buy a esc that will handle more amprage than you will produce better to be safe then sorry my personal opinion 220amp esc over a 180amp esc.....
    Last edited by sweed_61; 12-07-2017 at 10:39 AM.

  16. #16

    Default

    I ran a leopard 4082 - 1450kv motor on 6s with up to a 45mm prop and my max amp spikes were under 160 amps. This was a deep-v mono hull running the Turnigy marine T180.
    NEVER SATISFIED RACING
    Fine Design 32 V-Hull 4082+6s

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •