hey guys i am rebuilding a boat of mine and am looking for either the hobby wing 180a esc or a swordfish 220 aswell as a leopard 4082, let me know if anyone has anything!!!
Thanks
hey guys i am rebuilding a boat of mine and am looking for either the hobby wing 180a esc or a swordfish 220 aswell as a leopard 4082, let me know if anyone has anything!!!
Thanks
Every one knows the best part about building a boat is SANDING!!!! Just kidding
What motor kv and voltage?
range of 1600kv to 2000kv
Every one knows the best part about building a boat is SANDING!!!! Just kidding
bump
Every one knows the best part about building a boat is SANDING!!!! Just kidding
Say I have a T-180 V3 I'll let go of for $75 shipped
is it used, how many runs?
Every one knows the best part about building a boat is SANDING!!!! Just kidding
yea its used, has about a dozen runs on it. was working good when I took it out. I have a leo 4074 2200kv motor also.
would you take 60 im not super fond of the turnigy 180s have had bad experiences with them but it will work with my setup
Every one knows the best part about building a boat is SANDING!!!! Just kidding
I have a brand new unopened leopard 4082 2000kv motor i can let go of. It was purchased brand new from OSE. Here is a link to it (https://www.offshoreelectrics.com/pr...?prod=leo-4082)
Again i have a 2000Kv version. Please let me know if you are interested.
dang i ended up buying a motor last night... i am still looking for a esc though
Every one knows the best part about building a boat is SANDING!!!! Just kidding
I have a Brand New Turnigy AquaStar 200Amp ESC that i would let go of for 100$ plus 10$ for flatrate priority shipping.
Here is a link to the product
https://hobbyking.com/en_us/turnigy-...rless-esc.html
dang i would like the ability to run 4s.
Every one knows the best part about building a boat is SANDING!!!! Just kidding
I have a 2s/6s 220/300 amp swordfish pro + rsc with data logging and bec has 6 runs on it very good condition works great $100.00 plus $10.00 for shipping
SOLD !!!!
14198.jpg
20171126_150019.jpg
Last edited by sweed_61; 12-07-2017 at 12:32 PM.
I have a like new Seaking 180 and programming box.
I have only used it on some short test runs.
Less than 10 minute total. Still have box and paperwork.
I would be happy with $100 for both or even make me an offer.
Thx,
Ken
TenShock Brushless / Pro Marine
NEU Motors / Rico Racing/ Castle Creations
2023 NAMBA & 2018 IMPBA FE High Points "National Champion"
Rule of thumb buy a esc that will handle more amprage than you will produce better to be safe then sorry my personal opinion 220amp esc over a 180amp esc.....
Last edited by sweed_61; 12-07-2017 at 09:39 AM.
I ran a leopard 4082 - 1450kv motor on 6s with up to a 45mm prop and my max amp spikes were under 160 amps. This was a deep-v mono hull running the Turnigy marine T180.
NEVER SATISFIED RACING
Fine Design 32 V-Hull 4082+6s
Bookmarks