Results 1 to 4 of 4

Thread: Scale Boat Drivers 3d printed in ABS

  1. #1
    Join Date
    Dec 2008
    Location
    IN
    Posts
    24

    Default Scale Boat Drivers 3d printed in ABS

    504853134.jpg504853206.jpg
    I have released 3 scales of boat drivers 3d printed in abs. 1/10th, 1/8th and 1/6th. Replacing the resin cast drivers.

    They are tough, lightweight and easily paintable

    They are listed on the main page of: classichydros.com

    Specs for the 1/10 scale driver:
    2.8 in high
    2.25 in wide
    2.25 in front to back
    Weight: 1.0 oz

    Specs for the 1/8 scale driver:
    3.5 in high
    3.0 in wide
    3.0 in front to back
    Weight: 1.8 oz

    Specs for the 1/6 scale driver:
    5 in high
    4 in wide
    4.5 in front to back
    Weight: 2.7 oz

  2. #2
    Join Date
    Sep 2013
    Location
    NJ
    Posts
    151

    Default

    Would you have a design for a more modern driver for a pickle fork hydro, ie open cockpit, 80s Bud, Atlas, executone etc? More modern helmet with more outstretched arms? Looking to fill this boat.
    IMG_20170823_184753-1.jpg

  3. #3
    Join Date
    Dec 2008
    Location
    IN
    Posts
    24

    Default

    I'm working on a full face helmet, probably ready in a few weeks

  4. #4
    Join Date
    Dec 2020
    Location
    NC
    Posts
    1

    Default

    How are you coming on that full-face helmet driver? I’ll be needing one in 1/8 scale.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •