WTB 36" plus hull

[MG1234]

Need a new hull ,single motor,cat or V,can have hardware ,tell me what you have ,

[Jesse J]

I have a 39" vee hull, not sure the make. Had it set up with castle 2028 on 10s for t offshore racing. I have since moved on. I'll give you the bare hull for $50 plus shipping. I have stripped off all hardware.
It needs to be painted, but has been blue printed and comes with 5" rails and a flooded stuffing tube.
I also made a custom hatch, but will include the original.
I can upload pics tomorrow afternoon if interested.

[MG1234]

Sure ,would hardware from a genesis work on this hull except for the 5" rail for a bigger motor ,?thanks

[Jesse J]

I dont know if the cat hardware will work, probably a little small.
I'll get some photos up soon.

[MG1234]

Do you have a general idea of hardware cost ? I'm sure you know the ESC, motor and prop to buy ,that would really help to,

[Jesse J]

Here are some photos... length by width: 41.5" by 12.5"

Hardware? Well it's drilled for speedmaster hardware, so probably $100-$150,

motor esc? Well, if I were to do it over, I'd do a possibly used TP power 5670 4Y 1000KV and a new zelos dynamite 160amp esc.

I'd run 8s on this, with at least 8000mah, whether 1 or 2P
Prop I would start with an octura 448 detongued, balanced and sharpened.

Graphics are not clear coated. This hull will need painted for those aesthetically inclined. For me it was a racer.

Great runner here, blue printed and de-lifted hull. I should charge more for this, but I won't.

More pics on demand.

[Thunder29]

I have a 53" crc5000 with some hardware I would be willing to let go of. Please pm me if you are interested. I can provide more details then.

[Prodrvr]

I have a new undrilled, reinforced, full cf Fightercat Daytona with scale rudder, cf motor mounts, MBP click drives and flex shafts.PM me if interested.

[Prodrvr]

I have a 53" crc5000 with some hardware I would be willing to let go of. Please pm me if you are interested. I can provide more details then.

You gave up on building it?

[Thunder29]

I lost my job about 2 weeks ago. It's a project i got started on and now need to bail on at least until i can find employment again... maybe then i'll start another project.

[Prodrvr]

Holy crap, sorry to hear that man.

[Jesse J]

So? You have choices... are you going to pick one?

[MG1234]

On vacation at the bay ,running my cats ,going to watch the gas guys that come on Sunday ,

[MG1234]

So I brought a Spartan,Fighter cat,Zonda and the warped genesis to the bay ,the last boat standing is the genesis ,the hull works great on light chop,it's the smooth water that makes it hook,ran 8 lipos thru it ,re charging to run it again ,a big gas cat would be fun up here ,