thinking about changing the motor on my v3 .the included 2000kv 6 pole just makes too much heat on 6s and my efforts to keep it cool aren't helping enough .

i see guys on youtube boasting they are running the leopard 2200kv and hitting mid 60`s(mph) but isnt that already the issue with this boat ?>too high a kv for 6s?

going by the ose specs

[OSE Suggests 20,000-35,000 total rpm for boats. We suggest most Fast Electric Boaters should run in the 25,000RPM range for Sport Boating or 30,000RPM Range for racing.]

so 2000kv x22.2=44,400 / on 4s 2000kvx14.8=29,600

i want to run 6s because i already invested in those lipos so....

i am thinking more along the lines of the leopard 4074 or 4075x2

the 4074 offered here (in stock) 1650kv x22.2=36,630

or if i wanted to push it the x2 series offers the 1750kvx22.2=38,850

i am still new to boats and trying to figure this out .when i did have a 4s lipo setup the best this boat ever ran was like 34mph on the stock prop .i wasn't too impressed with that .
so i stepped up to 6s and i am happy with the speed .best of 51.4 but consistent 50mph on the stock system with a cnc 440/3 blade .but the heat is high .

so ,i want to run a 6s system that will get me over 50mph, 60 mph be nice and run consistently and stay cool so i don't have to be checking temps all the time .

sometimes i think the can in this boat just isnt big enough .or its turning too much rpm on 6s but thats how they sell them .
sorry so long ,help me! lol