Results 1 to 3 of 3

Thread: Zippkits #611 +# 612 outrunner motors ?

  1. #1
    Join Date
    Jan 2011
    Location
    ON
    Posts
    497

    Default Zippkits #611 +# 612 outrunner motors ?

    Hi all .Has anyone tried the Zippkits 3500 kv and the 4200 kv outrunner motors ? I purchased one of each at the Toledo show each off then has a sligthly bent output shaft i noticed when powering up a fair amount of vibration . Any one had a similar experience? Regards Andris Golts.

  2. #2
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,384

    Default

    I've got some of the same motors. They are made by Suppo. I have not powered them up but the shafts are straight.

    Shafts are replaceable but a total pain in the you know what. I put a bag of these motors up for sale and nobody bit or made an offer.

    I'll make you a great deal if you need any replacements.
    Nortavlag Bulc

  3. #3
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,384

    Default

    I havea 4400kv- 2223 and a 1860kv-2218. I also have a 2215 Turnigy that I think is about 3500kv but need to check.

    Suppo's sold here: http://www.altitudehobbies.com/brush...-h-series-heli

    Turnigy: https://hobbyking.com/en_us/turnigy-...___store=en_us
    Nortavlag Bulc

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •