Page 6 of 7 FirstFirst ... 4567 LastLast
Results 151 to 180 of 194

Thread: ***NEW*** Pro Boat UL-19 30" Sport Hydro

  1. #151
    Join Date
    May 2017
    Location
    OK
    Posts
    1,464

    Default

    Quote Originally Posted by Cougar33 View Post
    thanks for all the tips here Craig . I am new to hydros and new to this section and i can use all the help i can get . more information the better.. never even thought of the counter top test.. but it makes sense.. i am not sure how the rudder works with the test. my prop will sit not that deep.. i am getting a 90 mm rudder.. Dont know about the pop being that deep.
    thanks for the information
    LLoyd
    On the strut, I move the boat onto the stuffing tube and find a spot up the curve of the tube that lines out with the center of the prop shaft. Another way is to measure with calipers from the bottom of the boat to the center of the propshaft in the strut. I then cut a block of wood and sand in so it’s the indicated height of the calipers. Then set the boat onto the block, moving the boat back off the edge of the countertop until the strut is hanging clear.

    Note: the recommended depth applies to 1/10 scale models, like the UL-19.

    The rudder should be square with the back of the sponsons as a starting point. The depth of a rudder is a cut until it doesn’t turn good anymore, then buy a new rudder. Another way is the make it about 1-1/4 to 1-1/2” below the strut. That’s a pretty safe depth. Some angle the bottom of the rudder towards the transom, which has the effect of putting the bow down, on a hydro. Angling it back tends to raise the nose. This all comes at the cost of adding oversteering characteristics with it forward and understeering with it back. Personally, I think moving the rudder other than square, is trying to fix another problem by putting in a correction with +/- traits somewhere else.

  2. #152
    Join Date
    Nov 2009
    Location
    CA
    Posts
    1,969

    Default

    Well, I've been running this boat for a couple of months, and I must say I am very impressed. Hull is very stable, looks great, and I love the new motor. My boating buddy also has been running one, the only mod we made is a new turn fin (curved, stiffer) which holds it better in the corners.

    4s, stock prop (sharpened), hitting 48mph



    Chief

  3. #153
    Join Date
    Nov 2009
    Location
    CA
    Posts
    1,969

    Default

    If you wanted to know what happens when you remove a turn fin from a hydro...



    Chief

  4. #154
    Join Date
    Feb 2017
    Location
    na
    Posts
    726

    Default

    I like the added yellow vinyl on the boat Chief! It looks good! I turned the fin in on mine just a tad and it helped in the corners. With an abc prop from Chris on 5s I was able to run full throttle laps at 59-60mph. This boat turns very well.
    TFL Zonda (124mph), Miss Geico Zelos 36 (108mph), Veles 29 (91mph), Zelos Twin 36 (90mph), Miss Geico 29v3 (83.5mph), Sonicwake 36 V2 (83mph), Blackjack 42 (81mph), TFL Pursuit (79mph), UL-19 (75mph), Sonicwake 36 (73mph), Motley Crew (47.5mph), AquaCraft Rescue 17

  5. #155
    Join Date
    Nov 2009
    Location
    CA
    Posts
    1,969

    Default

    60 on 5s is pretty darn good. Which ABC prop are you running?
    Chief

  6. #156
    Join Date
    Feb 2017
    Location
    na
    Posts
    726

    Default

    Thanks! I was running one of my 1716-17-45 props on 5s.
    TFL Zonda (124mph), Miss Geico Zelos 36 (108mph), Veles 29 (91mph), Zelos Twin 36 (90mph), Miss Geico 29v3 (83.5mph), Sonicwake 36 V2 (83mph), Blackjack 42 (81mph), TFL Pursuit (79mph), UL-19 (75mph), Sonicwake 36 (73mph), Motley Crew (47.5mph), AquaCraft Rescue 17

  7. #157
    Join Date
    May 2017
    Location
    OK
    Posts
    1,464

    Default

    I love that prop, I run it on my boat, just in the low 60’s

  8. #158
    Join Date
    Nov 2009
    Location
    CA
    Posts
    1,969

    Default

    I'll give that prop a go on 4s. I'm at 48mph on stock, trying to break 50 on 4s.
    Chief

  9. #159
    Join Date
    Apr 2007
    Location
    ON
    Posts
    2,908

    Default

    Chief
    With the stock motor from a UL-19, I run a 1815-17-45 on my limited Sport Hydro, on 4S

    Larry
    Attached Images Attached Images
    Past NAMBA- P Mono -1 Mile Race Record holder
    Past NAMBA- P Sport -1 Mile Race Record holder
    Bump & Grind Racing Props -We Like Em Smooth & Wet

  10. #160
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,384

    Default

    Quote Originally Posted by TRUCKPULL View Post
    Chief
    With the stock motor from a UL-19, I run a 1815-17-45 on my limited Sport Hydro, on 4S

    Larry
    What prop would you suggest for that same motor in my RSX 310 rigger LArry?

    Sorry I had to cut the call short tonight. I am unpacked and ready to crash now.
    Nortavlag Bulc

  11. #161
    Join Date
    Sep 2011
    Location
    Tx
    Posts
    287

    Default

    I ran 1816 prop on my UL19 for heat racing. My boat liked it. This last summer with 80-90* water temps. My motor came back at 130-140*

  12. #162
    Join Date
    Apr 2007
    Location
    ON
    Posts
    2,908

    Default

    Quote Originally Posted by ray schrauwen View Post
    What prop would you suggest for that same motor in my RSX 310 rigger LArry?

    Sorry I had to cut the call short tonight. I am unpacked and ready to crash now.
    ABC - H5 -rigger prop with some lift. 45mm -1.5 pitch
    Grim Racer- AQUB9768 45mm - 1.5 pitch -with lift
    The two above are basically the same Prop, The Grim has a little thicker hub, therefore a little stronger
    or a
    ABC - 1815-17-45(2) CLL with some extra cup, this would be less lift with a higher pitch. This may be a better choice with the shoes on the rear of the rigger
    or a
    ABC - 1816-17-45(2) CLL with some extra cup, (Check the heat with this one.)

    Larry
    Past NAMBA- P Mono -1 Mile Race Record holder
    Past NAMBA- P Sport -1 Mile Race Record holder
    Bump & Grind Racing Props -We Like Em Smooth & Wet

  13. #163
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,384

    Default

    ..............edit off topic
    Last edited by ray schrauwen; 03-26-2018 at 10:56 PM.
    Nortavlag Bulc

  14. #164
    Join Date
    Feb 2017
    Location
    na
    Posts
    726

    Default

    Quote Originally Posted by BHChieftain View Post
    I'll give that prop a go on 4s. I'm at 48mph on stock, trying to break 50 on 4s.
    Chief
    Chief, I saw your video and congrats on obtaining your goal of 50mph+ on 4s! 51mph not too shabby with that 1716. Good Job!
    TFL Zonda (124mph), Miss Geico Zelos 36 (108mph), Veles 29 (91mph), Zelos Twin 36 (90mph), Miss Geico 29v3 (83.5mph), Sonicwake 36 V2 (83mph), Blackjack 42 (81mph), TFL Pursuit (79mph), UL-19 (75mph), Sonicwake 36 (73mph), Motley Crew (47.5mph), AquaCraft Rescue 17

  15. #165
    Join Date
    Feb 2017
    Location
    na
    Posts
    726

    Default Stock UL-19 hits 73mph with abc 1716 by dasboata

    I wanted to share another video of my latest run of my UL-19. This run I only got 73mph from the data logger and 72mph from the gps unit. The boat is all stock except for another spectacular ABC 1716 prop from Chris! Thanks again for all your great work! Also a shout out goes to Travis (kfxguy) for the Awesome dependable flex cable.

    UL-19 73MPH.jpg UL-19 73MPH DATA.jpg

    Last edited by MADRCER; 04-02-2018 at 09:02 PM.
    TFL Zonda (124mph), Miss Geico Zelos 36 (108mph), Veles 29 (91mph), Zelos Twin 36 (90mph), Miss Geico 29v3 (83.5mph), Sonicwake 36 V2 (83mph), Blackjack 42 (81mph), TFL Pursuit (79mph), UL-19 (75mph), Sonicwake 36 (73mph), Motley Crew (47.5mph), AquaCraft Rescue 17

  16. #166
    Join Date
    Nov 2009
    Location
    CA
    Posts
    1,969

    Default

    Quote Originally Posted by MADRCER View Post
    Chief, I saw your video and congrats on obtaining your goal of 50mph+ on 4s! 51mph not too shabby with that 1716. Good Job!
    Thanks! Appreciate the tip on the prop,
    Chief

  17. #167
    Join Date
    Nov 2009
    Location
    CA
    Posts
    1,969

    Default

    Quote Originally Posted by MADRCER View Post
    I wanted to share another video of my latest run of my UL-19. This run I only got 73mph from the data logger and 72mph from the gps unit. The boat is all stock except for another spectacular ABC 1716 prop from Chris! Thanks again for all your great work! Also a shout out goes to Travis (kfxguy) for the Awesome dependable flex cable.
    Wow! Impressive!
    Chief

  18. #168
    Join Date
    Mar 2017
    Location
    ny
    Posts
    283

    Default

    Great run there Mark. Seems you quickly got a handle on running that UL...

  19. #169
    Join Date
    Dec 2010
    Location
    NY
    Posts
    3,115

    Default

    solid Pass Mark great job Bro

  20. #170
    Join Date
    Feb 2014
    Location
    ny
    Posts
    75

    Default

    Looks good, The motor that comes with boat will need to be replaced with a legal motor to conform with namba p limited hydro or they might include the new motor?

    Jerry

  21. #171
    Join Date
    Apr 2011
    Location
    FL
    Posts
    102

    Default

    Here is my UL-19 in action

    UwYwHW.jpg
    hBqJ4T.jpg
    7ELVfJ.jpg
    0eqqGG.jpg

  22. #172
    Join Date
    Feb 2014
    Location
    ny
    Posts
    75

    Default

    Did you use the stock motor that comes with boat? I was told for namba p limited hydro I have to use the motors listed in the rule book. What batteries did you use?

    Thanks. Jerry

  23. #173
    Join Date
    Feb 2017
    Location
    na
    Posts
    726

    Default

    Quote Originally Posted by BHChieftain View Post
    Thanks! Appreciate the tip on the prop,
    Chief
    No problem! It's about time I returned the favor to you.

    Quote Originally Posted by BHChieftain View Post
    Wow! Impressive!
    Chief
    Thanks Chief!

    Quote Originally Posted by vinnyp View Post
    Great run there Mark. Seems you quickly got a handle on running that UL...
    Thanks Vinny!

    Quote Originally Posted by dasboata View Post
    solid Pass Mark great job Bro
    Thanks Chris! ��

    Quote Originally Posted by jerry123 View Post
    Looks good, The motor that comes with boat will need to be replaced with a legal motor to conform with namba p limited hydro or they might include the new motor?
    Jerry
    Thanks Jerry! My boat was all stock except for the prop in that run. I'm not sure on the legalities of the stock motor for spec racing this season. ¯\_(ツ)_/¯
    Last edited by MADRCER; 04-07-2018 at 11:21 PM.
    TFL Zonda (124mph), Miss Geico Zelos 36 (108mph), Veles 29 (91mph), Zelos Twin 36 (90mph), Miss Geico 29v3 (83.5mph), Sonicwake 36 V2 (83mph), Blackjack 42 (81mph), TFL Pursuit (79mph), UL-19 (75mph), Sonicwake 36 (73mph), Motley Crew (47.5mph), AquaCraft Rescue 17

  24. #174
    Join Date
    Feb 2017
    Location
    na
    Posts
    726

    Default UL-19 stock 4s run with1716 prop by dasboata

    Here was a 52.4mph 4s run from yesterday with a 1716 prop from Chris for anyone interested as well.

    52MPH UL-19.jpg UL-19 52.4 4S.jpg

    TFL Zonda (124mph), Miss Geico Zelos 36 (108mph), Veles 29 (91mph), Zelos Twin 36 (90mph), Miss Geico 29v3 (83.5mph), Sonicwake 36 V2 (83mph), Blackjack 42 (81mph), TFL Pursuit (79mph), UL-19 (75mph), Sonicwake 36 (73mph), Motley Crew (47.5mph), AquaCraft Rescue 17

  25. #175
    Join Date
    Feb 2017
    Location
    na
    Posts
    726

    Default UL-19 hits 59.3mph on 5s with abc 1716 by dasboata

    Here is my UL-19 running 5s stock at 59.3mph with a 1716 by dasboata. I just wanted to try 5s and didn't do too bad for the windy conditions. It may have another mph or two in it with calmer water.

    ul-19 59.3 5s.jpg UL-19 59MPH 5s.jpg

    Last edited by MADRCER; 08-07-2018 at 09:29 PM.
    TFL Zonda (124mph), Miss Geico Zelos 36 (108mph), Veles 29 (91mph), Zelos Twin 36 (90mph), Miss Geico 29v3 (83.5mph), Sonicwake 36 V2 (83mph), Blackjack 42 (81mph), TFL Pursuit (79mph), UL-19 (75mph), Sonicwake 36 (73mph), Motley Crew (47.5mph), AquaCraft Rescue 17

  26. #176
    Join Date
    Apr 2018
    Location
    WA
    Posts
    5

    Default

    How does one get ahold of dasboata in order to get some props? PM here on the boards?

  27. #177
    Join Date
    Feb 2017
    Location
    na
    Posts
    726

    Default

    PM Him on here or it's best to email him at dasboata@aol.com If you're looking for abc props most of them are out of stock but he has a backorder list that hopefully should be filled soon.
    TFL Zonda (124mph), Miss Geico Zelos 36 (108mph), Veles 29 (91mph), Zelos Twin 36 (90mph), Miss Geico 29v3 (83.5mph), Sonicwake 36 V2 (83mph), Blackjack 42 (81mph), TFL Pursuit (79mph), UL-19 (75mph), Sonicwake 36 (73mph), Motley Crew (47.5mph), AquaCraft Rescue 17

  28. #178
    Join Date
    Apr 2018
    Location
    WA
    Posts
    5

    Default

    Great thanks! I pm'd him, so hopefully will hear from him soon, and once he fills all his orders.

    John

  29. #179
    Join Date
    Feb 2014
    Location
    ny
    Posts
    75

    Default

    Boat runs great!! Where did u get the turn fin? Did u have to make a new bracket for it? What lipo's/brand are u using?

    Take care. Jerry

  30. #180
    Join Date
    Sep 2011
    Location
    Tx
    Posts
    287

    Default

    Quote Originally Posted by jerry123 View Post
    Boat runs great!! Where did u get the turn fin? Did u have to make a new bracket for it? What lipo's/brand are u using?

    Take care. Jerry
    Jerry, are you talking to someone specificity? If you are, hit the "reply with quote" on their post so they know you are.

Page 6 of 7 FirstFirst ... 4567 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •