Results 1 to 25 of 25

Thread: Help!

  1. #1
    Join Date
    Jul 2015
    Location
    wa
    Posts
    25

    Default Help!

    I’m a novice boat builder and have gotten way over my head. I have built smaller boasts but this is my first attempt of a 108th scale boat. I’m having trouble getting the boat to run. I’m using a Neu 1512 4875KY motor, a Swordfish Pro 200A ESC, a Hobbywing 5A UBEC, and 2 Hyperion 4s/ 15.2V batteries. I had some problems with my soldering but have gotten some instruction and cured that. I set everything up according to the instructions that came with the hardware. The boat ran fine in the garage. When I took it to the lake, it ran for a couple of seconds then quit. The steering servo works fine but the motor will no longer run. I can here the beeps faintly coming from the ESC but nothing from the motor. Now when I hook up the battery to test the ESC gets hot really fast.

    I know some of you may be laughing at me already but I just need some direction. I will include a couple of photos of the setup. Any help will be appreciated. I’ve spent a lot of money and time and would like to see some results.

    Life is good

  2. #2
    Join Date
    Apr 2007
    Location
    ON
    Posts
    2,908

    Default

    4875KY is way too high for a 4S setup.
    I hope you did not have your batteries in series =8S

    Larry
    Past NAMBA- P Mono -1 Mile Race Record holder
    Past NAMBA- P Sport -1 Mile Race Record holder
    Bump & Grind Racing Props -We Like Em Smooth & Wet

  3. #3
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,384

    Default

    Motor is most likely done. You would need another motor to test your esc. Esc probably survived but no guarantees.

    We need more details of the boat and prop etc... 108th scale or 1/8th scale or 10the scale??
    Nortavlag Bulc

  4. #4
    Join Date
    Apr 2007
    Location
    AZ
    Posts
    8,009

    Default

    I am sorry to hear of the OP's troubles, what happened to him is way too common among many newer FE boaters. I wish that newer boaters would ask more questions before they try their first build, it would save them money, frustration and time (which is irreplaceable). The OSE forums are a great place to learn from the mistakes of others, but make sure you can trust the answers you get. While everyone here tries to be helpful, sadly there is a lot of bad information posted. Choose your "experts" carefully and don't rely on only one.

    When asking for advice, be sure to give specifics about the boat, motor, ESC and packs. Be clear and accurate. Ask before you buy, I see a lot of folks who can't seem to wait a day for responses to their questions and buy anyway, often the wrong thing. Try to be smart.

    I respect the OP for asking for help, I wish he had asked before he bought. We could have helped him before, we will help him now too.


    .
    ERROR 403 - This is not the page you are looking for


  5. #5
    Join Date
    Jul 2015
    Location
    wa
    Posts
    25

    Default

    IMG_2782.jpg
    I thought I replied but I don't see it so I will try again. Here are a couple of pictures. It is a 1/8th scale hydro to be a Boeing 787. I'm using two 4S batteries with a parallel connector. The prop is a CNC 55mm 3.03 pitch. I used a different esc and the motor still works. I tried the sordfish esc on a different motor but it did not work. I know I bit off a big bite but wht the hell.

  6. #6
    Join Date
    Jul 2015
    Location
    wa
    Posts
    25

    Default

    IMG_2785.jpg
    I'm new to this and thought I had both photos on the other not but I didn't see it so here it is.


  7. #7
    Join Date
    Apr 2007
    Location
    On
    Posts
    7,279

    Default

    Lets start here:

    1) Motor is physically to small
    2) Motor is to high in KV
    3) 4S voltage is to low
    4) Prop is to big
    6) ESC is OK if its the one rated to 8S

    Big boats need big motors to move them.
    Big boats need a much lower KV and higher voltage to keep the current at a decent level.
    Most 1/8ths run something in the 800-1000 (ish) KV range depending on whether they run 8S or 10S

    If your ESC is toast, the you need a new one obviously.

    You need a different motor:
    https://www.offshoreelectrics.com/pr...?prod=neu-1527

    You need higher voltage.

  8. #8
    Join Date
    Jul 2015
    Location
    wa
    Posts
    25

    Default

    OK thanks for the help. I'm running two 4S/15.2V Hyperion batteries with a parallel Y harness. Would that be enough voltage for the motor you are suggesting? What size prop would you suggest?

  9. #9
    Join Date
    Apr 2007
    Location
    On
    Posts
    7,279

    Default

    4S is useless in a boat that size...running them in parallel is not going to work. Running them in series would, but with only 5200 Mah capacity, the run times will be short and depending on the C rating of the batteries, they might not be able to handle it.

    You will probably need another set of 4S packs and them run them in a 8S2P configuration.

    How heavy is the boat?

  10. #10
    Join Date
    Jul 2015
    Location
    wa
    Posts
    25

    Default

    I think I could use these batteries if I run them in series. The have a 50/99C rating and they are 5200ma. I'm guessing but I think the boat is 4 or 5 lbs. What's a good ESC for that motor and what size prop would be best?

  11. #11
    Join Date
    Apr 2007
    Location
    Ga
    Posts
    5,266

    Default

    Ok it seems clear now ("4 or 5 lbs")that you don't have a 1/8 Scale.


    What is the length of the boat? Can you post pictures for us?
    MODEL BOAT RACER
    IMPBA President
    District 13 Director 2011- present
    IMPBA National Records Director 2009-2019
    IMPBA 19887L CD
    NAMBA 1169

  12. #12
    Join Date
    Jul 2015
    Location
    wa
    Posts
    25

    Default

    Its 44" long. Here are a couple of pictures.IMG_2793.jpg

  13. #13
    Join Date
    Jul 2015
    Location
    wa
    Posts
    25

    Default

    IMG_2794.jpg
    Not sure why only one picture comes through but here is the other one.

  14. #14
    Join Date
    Apr 2007
    Location
    Ga
    Posts
    5,266

    Default

    Ok cool! It weighs 5lbs. finished?

    Are you going to race it? Fun runner?

    I run a NEU 1527 1.5Y on 10s1P,Jetti 220 Pro ESC, and an X450 3.
    https://www.youtube.com/watch?v=Y35uoH2t2RM

    https://www.offshoreelectrics.com/pr...?prod=neu-1527

    These folks run that motor on 8s2p.
    http://scalehydro.com/yahoo_site_adm...44.8562917.pdf
    Last edited by Doug Smock; 04-19-2017 at 04:33 PM.
    MODEL BOAT RACER
    IMPBA President
    District 13 Director 2011- present
    IMPBA National Records Director 2009-2019
    IMPBA 19887L CD
    NAMBA 1169

  15. #15
    Join Date
    Jul 2015
    Location
    wa
    Posts
    25

    Default

    Yea that weight is finished with all the gear. I hadn't thought about racing so for now its just a project for fun.

  16. #16
    Join Date
    Apr 2007
    Location
    Ga
    Posts
    5,266

    Default

    Quote Originally Posted by mpvduck View Post
    Yea that weight is finished with all the gear.
    That's incredible!
    MODEL BOAT RACER
    IMPBA President
    District 13 Director 2011- present
    IMPBA National Records Director 2009-2019
    IMPBA 19887L CD
    NAMBA 1169

  17. #17
    Join Date
    Jul 2015
    Location
    wa
    Posts
    25

    Default

    Why is that incredible?

  18. #18
    Join Date
    Apr 2007
    Location
    MI
    Posts
    3,112

    Default

    Quote Originally Posted by mpvduck View Post
    Why is that incredible?
    A 44' long wood scale boat with cowling, wing set, and running hardware at 5 pounds seems almost unbelievable. 5 pounds is VERY light for a build of this type.

  19. #19
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,384

    Default

    No paint, giggle...
    Nortavlag Bulc

  20. #20
    Join Date
    Apr 2007
    Location
    ON
    Posts
    2,908

    Default

    Quote Originally Posted by mpvduck View Post
    Yea that weight is finished with all the gear.
    5lb - with - all hardware, Motor, ESC. and Batteries, ECT
    Ready to run??

    That would be the lightest build ever for a 44 inch long boat.

    Larry
    Past NAMBA- P Mono -1 Mile Race Record holder
    Past NAMBA- P Sport -1 Mile Race Record holder
    Bump & Grind Racing Props -We Like Em Smooth & Wet

  21. #21
    Join Date
    Apr 2007
    Location
    AZ
    Posts
    8,009

    Cool

    I'm guessing but I think the boat is 4 or 5 pounds
    This. I suspect his "guess" is a bit on the light side. Don't get into a feeding frenzy over this guys, the OP has more to worry about. Let's concentrate on helping him.

    With the right motor he can run 8S1P if he limits his run time. 1/8th scale racers in District 7 do it.


    .
    ERROR 403 - This is not the page you are looking for


  22. #22
    Join Date
    Jul 2015
    Location
    wa
    Posts
    25

    Default

    OK cool maybe I was a little light on the weight. I thought you were going to tell me it was too heavy. I think I'm going to run a NEU 1527 1.5Y. How would I set up the batteries to get 8s1P or should I go to 10s1P as was suggested above. I don't really understand 8s1p or 10s1p. I know I must look pretty silly but I'm willing to learn.

  23. #23
    Join Date
    Apr 2007
    Location
    On
    Posts
    7,279

    Default

    8S1P simply means your two 4S packs would be connected in series...giving 8S total.

    10S1P would simply be two 5S packs connected in series (or a 6S and a 4S)

  24. #24
    Join Date
    Jul 2015
    Location
    wa
    Posts
    25

    Default

    Thanks I really appreciate all the help. Lesson learned I should have done this long before I started. Life is good.

  25. #25
    Join Date
    Apr 2007
    Location
    Ga
    Posts
    5,266

    Default

    Good luck Mike. Post some pics and video when you get her up and running!
    MODEL BOAT RACER
    IMPBA President
    District 13 Director 2011- present
    IMPBA National Records Director 2009-2019
    IMPBA 19887L CD
    NAMBA 1169

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •