Artist lake, middle island NY

[Linewbie]

Same with mine a few weeks ago. I cleaned it all up and just used jb weld. Good to go.

[Newboater]

JB weld is the answer

[Bigford]

That stuffing tube came out of the hull cleaner than a chicken bone in Gordon Heights

[zooma]

That stuffing tube came out of the hull cleaner than a chicken bone in Gordon Heights

Good one.

[Bigford]

8:15 and nobodys here!!

[Bigford]

Installed a second cooling line for the motor.
New 440/3 prop. No brake downs,flips or lost parts
It was a good morning

[Newboater]

Installed a second cooling line for the motor.
New 440/3 prop. No brake downs,flips or lost parts
It was a good morning

Sounds like it never got in the water

[Bigford]

[Bigford]

We running this weekend??

[Linewbie]

I plan on being there tomorrow am.

[Newboater]

Depending on weather what time

[Linewbie]

8 or 9 i dont care?

[Bigford]

Sounds good

[Newboater]

I'll be there 8:30ish. Disgustingly humid out......

[Bigford]

https://youtu.be/xLkIMK08J-Y
Think I need a bigger motor

[Linewbie]

2 new receivers for 13.00 inbound to me from the land of the knockoffs. Eta mid July to begining of August, hopefully sooner than later. Either way Im out of it for a bit.

ETA-Newboater, that Princess can boogie! Probably less hull in the water than my cat...

[Joeballz]

Hey I live in Centereach, I'm looking to get back into rc boats. When do you guys go there ? Is there any clubs around my area?

[Newboater]

Hey I live in Centereach, I'm looking to get back into rc boats. When do you guys go there ? Is there any clubs around my area?

Not sure of any clubs in your area. Linewbie, myself and Bigford occasionally go down on Saturday. There is a group that goes down on every Sunday of about 3-6 mostly run tugs and military boats nothing fast but they get there around 8am.

[Bigford]

The lake is turning green with algae. Might
Start to have prop problems last time I was there
I dragged alot of long algae

[Linewbie]

My new receivers dont want to bind with my transmitter, or my esc is screwed from a few weeks back. I just received by new, used 180a esc ystrdy, so Im going to try to get it all together this week and back in the water. More to come.

[Newboater]

My new receivers dont want to bind with my transmitter, or my esc is screwed from a few weeks back. I just received by new, used 180a esc ystrdy, so Im going to try to get it all together this week and back in the water. More to come.

Install bind plug into receiver channel 3. Power receiver light should flash quickly, then hold down bind plug on Transmitter and power on Transmitter should bind with steady light. After that set fail safe.

[Joeballz]

What about lake ronkonkoma? I saw some guys doing them last week there.

[Linewbie]

Install bind plug into receiver channel 3. Power receiver light should flash quickly, then hold down bind plug on Transmitter and power on Transmitter should bind with steady light. After that set fail safe.

Done that numerous times Newboater. The esc just flashes and beeps just like that day a few weeks back. Before i replace if ive got to do more soldering, but hopefully I can work it all out quickly.