Results 1 to 30 of 30

Thread: my new 1/8 scale Squire Shop neu 1527 1.5y

  1. #1

    Default my new 1/8 scale Squire Shop neu 1527 1.5y

    long time in the making is my ML Boatworks 1/8 scale
    Attached Images Attached Images

  2. #2

    Default

    I love the different colors on the turbine and exhaust housings of the turbos. And the gold leaf is pretty sweet too. Nice work.
    Zelos 36 Twin, Voracity 36, Impulse 31 V3, Mini Zonda 27, Delta Force 26, Offshore Infinity, Vac-U-Tug Jr

  3. #3

    Default

    Beautiful boat. Just dead sexy. Great job.
    Rick

  4. #4

    Default

    you're not going to put that in the water are you!?
    NEVER SATISFIED RACING
    Fine Design 32 V-Hull 4082+6s | Atomik Barbwire XL
    Coming Spring 2017 JetChopper 30 | KEPS FE Outrigger Up Next

  5. #5

    Default

    Sweet ride Geno! Time for some video!
    TOY BOAT RACER
    Sponsored by Smock Racing
    IMPBA National Records Director
    IMPBA Dist.13 Director
    IMPBA 19887CD
    NAMBA 1169

  6. Default

    Not the exact same boat but my free time right now is to help to restore/rebuild the 1979 Squire Shop. it is quite a project.
    79-sd-01-201319_1_orig.jpg
    "Our society strives to avoid any possibility of offending anyone – except God.”
    Billy Graham

  7. #7

    Default

    Quote Originally Posted by JimClark View Post
    Not the exact same boat but my free time right now is to help to restore/rebuild the 1979 Squire Shop. it is quite a project.
    79-sd-01-201319_1_orig.jpg
    the actual full size boat?

  8. #8

    Default

    Quote Originally Posted by Tamelesstgr View Post
    you're not going to put that in the water are you!?
    really don't want to. lol but I will

  9. #9

    Default

    Quote Originally Posted by Doug Smock View Post
    Sweet ride Geno! Time for some video!
    Doug, hopefully next Sunday I can get to the lake fingers crossed lol

  10. Default

    yup the full size original boat
    "Our society strives to avoid any possibility of offending anyone – except God.”
    Billy Graham

  11. #11

    Default

    Quote Originally Posted by JimClark View Post
    yup the full size original boat
    Very cool Jim!
    TOY BOAT RACER
    Sponsored by Smock Racing
    IMPBA National Records Director
    IMPBA Dist.13 Director
    IMPBA 19887CD
    NAMBA 1169

  12. #12

    Default

    [QUOTE=JimClark;688697]yup the full size original boat[/QUOTE NICE, would like to see some pitchers when it's done

  13. Default

    due to the amount if damage there wasn't much of the original boat that can be used. A lot of hardware Cowling the orig tail and uprights have been found ect. Will take probably two years to get her done.

    If you are on facebook you can follow along https://www.facebook.com/groups/1821412644739381/
    "Our society strives to avoid any possibility of offending anyone – except God.”
    Billy Graham

  14. #14

    Default

    Vary nice!

  15. #15

    Default

    Nice job, miss my old Squire!
    ~~~~~~~~`Mach 5 racing'~~~~~~~~~~~~
    ****2008/9 MMEU LSO, 2008 LSH CHAMP****
    ~~~~~~~70 MPH Club Member!~~~~~~~~~

  16. #16

    Default

    not having very good luck running this boat. first time in the water jumped up right on plain ran great 1.5 laps and stopped got it back to shore did not change anything now it acts like its underpowered can't get on plane. the correct strut depth is even with bottom of sponsons is rhat a correct depth?

  17. #17

    Default

    I have a etti 220 speed control 10s lipos is it possible it is not running on the whole 10s?

  18. #18

    Default

    What size prop?
    Also is your CG setup to balance on front edge of turn fin?

    Was anything hot or smelled funny when you brought it in 1st time it quit. I like those big Ettis have 3 of them. 0nly weak link on them is the short length of area battery leads are soldered on to the boards. They come on soldered if your taxing the controller sometimes.
    ~~~~~~~~`Mach 5 racing'~~~~~~~~~~~~
    ****2008/9 MMEU LSO, 2008 LSH CHAMP****
    ~~~~~~~70 MPH Club Member!~~~~~~~~~

  19. #19

    Default

    Are you running 10s2P?

  20. #20

    Default

    What prop are you running?
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  21. #21

    Default

    2 5s packs, and a 450/3 prop

  22. #22

    Default

    Quote Originally Posted by K.R.Joye View Post
    What size prop?
    Also is your CG setup to balance on front edge of turn fin?

    Was anything hot or smelled funny when you brought it in 1st time it quit. I like those big Ettis have 3 of them. 0nly weak link on them is the short length of area battery leads are soldered on to the boards. They come on soldered if your taxing the controller sometimes.
    Ken, everything was barely warm my cog is approximately 2" behind sponsons

  23. #23

    Default

    That's a good prop, you have the 5S packs in series correct? Check your packs for dead cells and the battery leads at esc board solder joints.
    ~~~~~~~~`Mach 5 racing'~~~~~~~~~~~~
    ****2008/9 MMEU LSO, 2008 LSH CHAMP****
    ~~~~~~~70 MPH Club Member!~~~~~~~~~

  24. #24

    Default

    Quote Originally Posted by K.R.Joye View Post
    That's a good prop, you have the 5S packs in series correct? Check your packs for dead cells and the battery leads at esc board solder joints.
    correct, in series, and I will check when I get home

  25. #25

    Default

    specs on the packs??? Maybe your LVC is kicking in.

  26. #26

    Default

    He got it going fellas.
    TOY BOAT RACER
    Sponsored by Smock Racing
    IMPBA National Records Director
    IMPBA Dist.13 Director
    IMPBA 19887CD
    NAMBA 1169

  27. #27

    Default

    Quote Originally Posted by Doug Smock View Post
    He got it going fellas.
    with a lot of help from Doug lol. so thanks to everyone who gave me input. I think I have one fast boat

  28. #28

    Default

    Fast or not, she's a beauty! Keep it looking good

  29. #29

    Default

    Soooo..... what was it controller settings?

  30. #30

    Default

    Quote Originally Posted by longballlumber View Post
    Soooo..... what was it controller settings?
    I believe the strut was not correct. I did unhook the speed control and rehook it maybe it could have had a loose connection

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •