Bonzi Epic 60 project with twin electric and twin Arrow Shark M8 Drives

[sfileccia]

I am almost done with the interior of the hull that I ordered bare without any stringers. I made all the stringers and CNC cut the black motor mounts with my CNC Mill. I also ordered a custom wrap for the boat instead of trying to paint it or pay someone to do it. Was a 4 hour job and sucked, but I am happy how it looks. I will be using 160 amp Proboat ESC's and run on 8s per motor. So far so good! I have everything purchased so I just need to finish it up.

[Espresso]

That vinyl wrap looks looks really good. Was it easy to apply? Where can a complete wrap be ordered? That rear end looks real nice and expensive!

[Beaux]

Nice looking rig.

[Beaux]

What did you use for a border around the wrap?

[sfileccia]

That vinyl wrap looks looks really good. Was it easy to apply? Where can a complete wrap be ordered? That rear end looks real nice and expensive!

The wrap was a ordered as a 6 foot by 3 foot roll. Extremely hard to put on. I had to remove all the backing and hang it sticky side down for entire 4 hour installation. It is very stick and you CANNOT use any soapy water or other fluids to help float it on. it took lots of heat gun and pulling starting from the center and working in both directions. I would not do it again. it is all one piece going around all the corners and such.

[sfileccia]

I used 1/4" vinyl pinstripe. It helped clean up the cut edges for a nice buttoned up finish.....good eye!

[Beaux]

It came out really nice I've got more than four hours in some of my paint jobs, and still not look that good.

[sfileccia]

Her are some pics from my very first run on the boat project, runs great on only 6s per side! Plenty fast for me. enjoy!

[fweasel]

what a monster.

[KAF1]

Good day, awesome build. What Brand and size motors are you running?
Thanks
Ken

[ScarabChris]

That is an awesome build! Very very nice!!

[Bp9145]

Great job. ..looks simply awesome! That wrap looks great on that boat. .

[mappo]

Great job. ..looks simply awesome! That wrap looks great on that boat. .

Hey could we see some vids. Pleesssee?

[ScarabChris]

Silly me.....I saw those awesome motor mounts and shaft mounts that simply clamp into the stringers and I was scouring the internet looking for them and would have saved myself time had I read your post and learned you made them yourself.