SOLD
I just finished the transformation of this rigger and it came out great. When I bought the boat upon delivery, the drive line was completely damaged in shipping. Since I am not a fan of the ski concept and a fixed driveline, I changed over to a strut style. The strut is made out of carbon fiber and a piece brass tubing. I added aluminium angle to the inside and outside to support turn fin. I now have reskinned the center section with high quality carbon fiber. I cut away most of the wood from the original boat and just have the rear transome area and the front sides from the motor mount to the front still in place. The original outrunner motor setup ran very hot in a short time so I changed over to standard motor, adding water cooling. It has a Castle HV 60 speed controller. runs on 6s 1200 mah battery. I have a 6.6v 200 mah LiFe battery. It has a leopard 2860 1380kv. motor and a Spectrum mini receiver. The boat runs great now. on normal runs the motor and esc are at 95* and battery at 120* after a couple minutes. ask any questions. ASKING $175 shipped conus. I can ship any where at extra cost to buyer.
Bookmarks