Hello,
I could use some advice so I don't fry my brand new setup that I plan to run today. I have an Impulse 31 V3 and I just changed out the motor and ESC. Here is what I have and plan to run:
Seaking 180A ESC
Leapord 4074 1650kv
OSE heavy duty flex cable with coupler
Octura x440 prop (sharpened and balanced)
2 3s 5200 packs 60C
Would you recommend I change any of the ESC settings before I crank this up? I see some people are changing the timing based on the prop/motor.
It looks like this is a "5D" motor whatever that means....
Bookmarks