I know this will be a mixed bag. Just wanna get a consensus of what you guys prefer? Me personally only have T180's V2&V3, Castle Hydra 240 and Seaking 180, not counting the stock Dynamites that comes with Proboats.
I know this will be a mixed bag. Just wanna get a consensus of what you guys prefer? Me personally only have T180's V2&V3, Castle Hydra 240 and Seaking 180, not counting the stock Dynamites that comes with Proboats.
Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda
My fave is Castle, old ice's or new Phoenix Ice. The logging is so useful
Never really considered it. I don't even think I have a favorite. I don't really like any escs lol. They all have their faults. I do kinda like the castle xl2 I converted to water cooling. It's compact. Drives well. The programming is nice and the logging is nice. I wish they would make something like the one I did. It's epoxy coated too.
Mainstream escs, I like the seaking 180 old version. And the new ose raider. Just wish there was something similar with more amps.
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was
Ones that don't blow up...
I agree, it doesn't look like the mainstream guys are into anything over 180. Would be cool to get a seaking or Turnigy in 240/300
Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda
Another vote for modified Castles. The past five years I have used mostly ICE200 aircraft controllers, adding a cap or three and some copper tubing, shrink wrap and good to go. The only Castles which have burned up were connected to bad motors, including SAW record holders.
.
ERROR 403 - This is not the page you are looking for
Schulze!
Sent from my iPhone using Tapatalk
All joking aside, I have had great luck on all of my Castle stuff also. Some are the Hydra line, others are air controllers that have been converted to water cooling like fluid described. I should also note that I haven't built anything bigger than 6S, nor do I run SAW's
Later,
Ball
^^^Famous last words
I only have Turnigy 180's at this point, but I use an Eagletree data logger. Would prefer an ESC with data logging in it eventually. Might try a swordfish when I get around to building my outrigger.
NEVER SATISFIED RACING
Fine Design 32 V-Hull 4082+6s
Is that a raider?
Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda
I use a Spektrum DX4R PRO, works great. Fellow club members use DX3 transmitters with their aircraft Castles too.What do you do use a stick radio? I am tired of Pisix kicking the bucket.
.
ERROR 403 - This is not the page you are looking for
Right now my favorite is MGM, I have a set of the big ones that Randy posted above (40063's) and they are moving my big 73" cat effortlessly. The smaller but still large 25063's work great in my 54" cat. I really like MGM's protection circuitry, they seem to know when you are doing something you shouldn't be which of course never happens to me ;-) Programming is straightforward with a wealth of options and there's endless other options from telemetry to any sensor you would want. Of course all this comes at a price and of course that is the downside but usually you would only want to install a controller like this in a higher end boat anyways where you won't be scrimping. MGM has top service too with fair repair pricing and shipping...fast too! I would like to say my favorite is an old school Schulze like the 40.160 but I don't have one...yet, working on it so until then it's MGM for me. Oh, runner up would be the affordable Flier 400 amp of course, I'm sure the lower amp models are good too, I'm having really good luck with mine, cheap, run cool and are putting out lots of power...actually if these things hang on a few more months they just may become my favorite!
I am giving my thoughts off of price. I mean of course MGM controllers are great but I would hope so at the price.
20160214_002655.jpg
It's the only one I've used ...
Someone change the new mamba monster 2 ?, I have a trip on them and possibly modify them.
MGM I can only dream it ...:babear:
As far as 6S and under I like the older version T-180.
The v-2 180 is a pretty damn good controller I still have a few.
Hahaha, we bought similar. I have two as spare parts.
Bookmarks