Yours is a V5.7, Ray. Same as the boats in post #1.
Yours is a V5.7, Ray. Same as the boats in post #1.
https://forums.offshoreelectrics.com/...pplement-rules
It's experimental in truth Ray. We're not looking to fix P limited. Limited was NAMBA so I couldn't possible care less if that ever gets fixed.
This is something new. We like to think of it as the next generation of spec racing. Idea is that you get to choose......or don't choose....... The equipment we've used for years in the old limited classes works up against this new spec. Proved that in AZ. Ray was cleaning up. Ty's limited offshore was right in there with the old tech too. I ran a TP. Ty had a Dynamite and we finished a 1/4 lap apart I think. So you don't need to upgrade (side grade?) unless you just want to.
Noisy person
...and found.
Thanks for the details. My yellow cans are showing signs of impending death so I invested in some blue cans cause they were a darn good deal.
I look inside the Dynamite and see a crap load of copper, not so much in the yellow cans... I sold my one TP motor long ago and that was a mistake. Oh well... blue it is for me for now.
I find it a PITA that a spec motor costs almost as much a an open motor. That's silly but a reality none the less.
Nortavlag Bulc
That's what we're checking on Ray. I just don't believe that paying 100's for a motor is going to net a reward in this class with a size limit. There are some really good motors for cheap now. Those blue can Proboat motors are the real deal.
Noisy person
I cut the pcs for the new nose pc. It came together nicely. The previous nose weighed in at 5.6oz, even with the relief holes. The new one only weighs 1.5oz!!!
The top and bottom sheeting fits like a glove. Very happy with how this came out. I sanded the bottom face edges at 45deg to compensate for glue fillets underneath, and to allow more surface area for glue to adhere.
Pete
I see you found some 1" 1/2 round.
Larry
Past NAMBA- P Mono -1 Mile Race Record holder
Past NAMBA- P Sport -1 Mile Race Record holder
Bump & Grind Racing Props -We Like Em Smooth & Wet
Can this mod be added to a 5.7 to make the build easier?
Nortavlag Bulc
Larry, I never found 1" half round. I ended up cutting 1" dowel in half on the band saw. Not easy. You can't twist it.
Ray, Yes. I can cut you some nose pcs next time I'm out there if you want. It will definitely save you time.
How about two pieces of 1/2" Quarter round??
Larry
Past NAMBA- P Mono -1 Mile Race Record holder
Past NAMBA- P Sport -1 Mile Race Record holder
Bump & Grind Racing Props -We Like Em Smooth & Wet
Would 1" foam be lighter ? Easy to sand to shape. You could skin it with stiff fiberglass or thin plywood.
I fabricated the nose of an 8255 Oberto from two part foam. Lots of easy sanding. Then glassed it. Light and strong as nails.
Noisy person
Light version in process! Mine won't be nearly as light as Terry's.
Wow, a 34" hull in specky class. Things are changing...
Nortavlag Bulc
You can get creative and make a lot of parts (sponsons, nose piece, etc) from foam. Cutting foam with hot wire or sanding to shape, then coating with fiberglass. Spray a light mist coat of 3M spray adhesive to shaped foam. then lay down fiberglass cloth and epoxy. Lots of videos on YouTube.com that show how. There are lots of old RC Airplane tricks.
What? You are finally making a longer more stable version. You will see that it will turn just as good as the shorter version. And be more stable down the straits without blow over. Cool
Unleaded...........
whiplash 424.jpg[
Last edited by detox; 03-10-2017 at 01:20 PM.
It is still 33.5" long. I do plan on a smaller (lsh size) and larger (Q size), but not immediately. I understand your comment regarding a longer hull though, similar to a dragster or funny car keeping its front wheels on the ground. I see you have an extended strut. That's a good idea. I took a different approach with this hull. It has tapered air bleeds that keep the pressure underneath to a minimum. I haven't heard of anyone blowing these over, even at speeds in excess of 65mph.
It's already the most stable P sport I've ever driven.
This spec boat I'm doing is an experiment to see if a big boat can hang with the stealths. I'm pretty confident.
Noisy person
Another secret project????
I'll have to pull Ty aside and ask him the details!!!!!
Pete
I sent you a PM
Larry
Past NAMBA- P Mono -1 Mile Race Record holder
Past NAMBA- P Sport -1 Mile Race Record holder
Bump & Grind Racing Props -We Like Em Smooth & Wet
Hell, he'll probably tell you prop too for a slurpee.
Noisy person
Here is mine... she aint black but she has some pearl.
still gotta add motor and esc...
last one.
I LIKE!!!! Beautiful!!!
I see you went with the UL-1 canopy and divided the back into two openings. Nice!
It is very nice. Thank you for sharing pictures. I like that you left most of the bottom unpainted wood.
Did you get the Speed Master stuff anodized or did you buy it that way? Turn fin mount at first I thought it was from an RC car part then I saw the back.
Nortavlag Bulc
its custom anodized....the turn fin mount is accu tech with a graupner sailboat turnbuckle added to alu mounts in the hull.
Bookmarks