Hard decision, but I want to try a gas boat, specs:
Jet Chopper hull, new as of December 2016, 30" long
I added a Carbon Fiber inlay to the hull and a carbon fiber transom plate
Motor: SSS 3674 - 2075kv with Carbon Fiber mount
ESC: Seaking T180 V2 (very desireable)
Servo: ProBoat standard (has been waterproofed)
Tx/Rx: ProBoat (Rx waterproof with Traxxas waterproof case)
Carbon Fiber battery trays
Aeromarine motor coupler (5mm to .187 - 3/16" cable)
OSE .187 - 3/16" flex cable
Speedmaster Stinger
TFL Rudder
TFL Turn fins
TFL Trim Tabs
TFL Servo Mount
Kintec water lines (dual pickups)
M3 stainless hardware throughout
M3 stainless hatch hold down
Boat is stable and runs good with 40-45mm props. Cooling works well, I have datalogs if you are interested in seeing any information on the setup.
Asking $500 plus shipping (estimate $50 lower 48)
Add EagleTree V4 datalogger with all sensors for $100
Add (2) 2s Zippy Compact 5000mah packs for $40
Running Video in the past few weeks:
https://www.youtube.com/watch?v=cyLERJ2YlsU
20170510_211757.jpg
20170507_172409.jpg
20170420_211438.jpg
20170420_211914.jpg
20170419_211326.jpg
Bookmarks