Seaking T180amp at 7S ???

[Nikolas Andriop]

Hello.
I want to ask if anyone have try the T180 at 7S and if it can handle???
Is just for some saw passes
The motor is TP 3640 2080kv
Thanks....

[grsboats]

Disable the LVC and you can get a try to this esc on 7S for some passes....did this with the 180 V2 time ago and it survived for some months.Gill

[Nikolas Andriop]

Thanks...
I think I'll try for two passes...

[grsboats]

Take care with your only "two passes' ...have heard this many times with burnt esc's......downprop your boat and check temps and good luck.Gill

[785boats]

I accidentaly ran one on 8s when I connected up 2 x 4s packs in series instead of parallel in a 32" mono with a 2200kv motor.

It survived 1 lap before I realised my mistake & brought it in.
Everything suvived. Even the bec in the ESC. Man it was quick though.

But I think the 'Lady of the Lake' was looking after me on that day. I only mention it to show what they can put up with. Sometimes.

I wouldn't reccommend doing it.

So as Gill said for 7s, smaller prop & maybe one pass. Then check temps.