Results 1 to 2 of 2

Thread: Impulse v3 set up suggestions

  1. #1
    Join Date
    Nov 2016
    Location
    GA
    Posts
    1

    Default Impulse v3 set up suggestions

    Looking for some suggestions for prop and general set up of the new v3 with the bigger 1750kv. There isn't a lot of info out in this boat. I have read through the v2 info a bit, but it seems that with the new esc and motor differences there may be a different direction for props? What about 2 vs 3 blade?

    Also looking for insight on thrust angle adjustment and other of the like. Any info appreciated.

    Running 6s 70c revo graphene packs if that matters.

  2. #2
    Join Date
    Jul 2016
    Location
    NY
    Posts
    359

    Default

    x642 or x645 M545 props will be in the low 50's strut angled up about 2* from level, batteries all the way back. Speeds are done on 6s

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •