I just checked the tracking and its on a plane somewhere. I will hang on to one for ya, just send me an email on the ose contacts page.
Steven Vaccaro
Where Racing on a Budget is a Reality!
I just checked the tracking and its on a plane somewhere. I will hang on to one for ya, just send me an email on the ose contacts page.
Steven Vaccaro
Where Racing on a Budget is a Reality!
I used an ETTI 125 to bump N-2 offshore SAWS record at the LA SAWS
I have sevral versions, many that I used at the 2008 nats, I took 2nd in LSH with the 70 amp and 2nd in N-2 hydro with the 200 amp version (discontinued)
ETTI makes LOTS of REALLY neat products, their struts propelled my micro hydro to 50mph with a 19-turn motor!!
Awesome water Jackets clear! GREAT prices on everything too..
They have a product that I REALLY want to try.. A SAWS capacitor bank to wire into your existing 150 to give it more "punch" for all out power!
Check it out!! http://www.etti.com.hk/index.php?language=en
Umm.. I've sent back 6 and have had ZERO problem with warranty..
Dee Chan over at ETTI is a WONDERFUL person very passionate about these little boats, and the end user.. And for the record communicates Quite well in english..
We must never SPECULATE how companies will respond..
These guys are good, and their products seldom fail.. The speedos that went out were from "shorted-out" motors, and user error (grossly over-amped)
Etti esc's are in. Cap banks are also in.
Steven Vaccaro
Where Racing on a Budget is a Reality!
I must have been reading your mind Darin!
"A quick temper will make a fool of you soon enough."
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bruce Lee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
As requested Darin.
Douggie
Thanks Douggie
"A quick temper will make a fool of you soon enough."
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bruce Lee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Douggie is that your picture? If so can I have permission to use it on OSE products site?
Steven Vaccaro
Where Racing on a Budget is a Reality!
I too am interested in how much "headroom" this board will give us. I have a couple coming to play with and will report any findings or fryings.
Don't get me started
Bill, how will you determine this in a scientific method. Same boat, same setup, etc and then compare the results with an ESC with and one without the added cap protection, and the method of comparing results. Just currious, but way to go. We await your results
Douggie
And I know how to do it too. I have a fired 2280, fried 3060, TWO fried 1527s and a a pair of toasted 40.160s to prove it too!!!
Documentation will be in the form of "Holy Crap!! I guess that prop WAS too big after all"!!!
Don't get me started
Bill, as usual you have supplied the goods. My God, I would not want to be your banker.
Thanks for taking so many for the team.
Douggie
Gentleman, Bill pushes the envelope on all his boats and also has an engineer's viewpoint on the process of what you can and can not do...WITHIN LIMITS.
Douggie
Limits?? We don't need no steenking limits!!!!
As far as my BBQ collection goes, perhaps you can see why I race gas boats now!!!!
Don't get me started
IMPOPRTANT. I just realized they shipped me the 6-16 cell version, not the 6-20 cell. I will be trying to straighten this out asap.
Steven Vaccaro
Where Racing on a Budget is a Reality!
Good catch Steven!!
My prop hasn't been wet in a while.
Would have been a better catch if I did so before listing them for sale and selling a few!
Steven Vaccaro
Where Racing on a Budget is a Reality!
I just found out that when I asked for the race 150 WITH bec, that the max voltage is only 5s/16 nimh cells. It was my mistake to overlook that spec.
I will have the race 150 6s/20nimh with NO bec in about 2 weeks.
Steven Vaccaro
Where Racing on a Budget is a Reality!
double post
Don't get me started
I'm confused. The one I have here has a label on the top that reads:
The instruction sheet has a table across the first page that says this:Input Voltage 6-30V
Current 150A
NiMH 6-20 Cells
LiPo 2-7 Cells
Resistance 0.001 ohms
Doesn't matter to me, I will be running only 4S, but the label is not 5S or 6S as Steven in noting.Type: ETTI 150-6-20
Voltage: 6-30V
Amp (A): 150
FET: 30
IR (ohms) : 0.001
NiMH Cells: 6-20
LiPO Cells: 2-7
BEC: NO
Size (mm): 95x50x13
So which one do I have??
Don't get me started
Bookmarks