Results 1 to 3 of 3

Thread: BJV3 cut off problem

  1. #1
    Join Date
    Apr 2016
    Location
    FL
    Posts
    6

    Default BJV3 cut off problem

    Hello im running a BJV3 with a Dynamite 1650kv motor with the stock Dynamite 120 esc with a Castle cap bank and im using 3s 50c 5000 batteries with a s/b 642 prop and after a minute or so it cuts off to about half power.All solder points look good.Does anyone have any ideas whats wrong?thanks for any help.

  2. #2
    Join Date
    Jul 2016
    Location
    IL
    Posts
    4,100

    Default

    Could be the Low Voltage Cutoff built into the ESC. What's it currently set at? You can try lowering it to 3.2V, or possibly even turning it off as a test.
    Vac-U-Tug Jr (13mph)

  3. #3
    Join Date
    Apr 2016
    Location
    FL
    Posts
    6

    Default

    I have been running it at 3.4v but next time I run it I will try it with it off and see what happens.thanks

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •