Results 1 to 3 of 3

Thread: Servo for JAE 21 FE

  1. #1
    Join Date
    May 2010
    Location
    Mi
    Posts
    254

    Default Servo for JAE 21 FE

    Okay so I'm ready to think about a servo for it and I have a Hitec HS-475HB. It's capable of 76 oz.-in. torque .18 sec/ 60* @6V and 61 oz. in./.23 sec/60*@4.8V.
    It seems hefty and quick enough. It's also a ball bearing servo.
    Would this be okay or is everyone using a digital servo?

  2. #2
    Join Date
    Apr 2007
    Location
    AZ
    Posts
    8,009

    Default

    With spec power that servo is probably okay. With full P-Power, I would recommend a stronger digital servo. These hold center strongly, helping to stabilize the boat when exiting turns.


    .
    ERROR 403 - This is not the page you are looking for


  3. #3
    Join Date
    May 2010
    Location
    Mi
    Posts
    254

    Default

    I'm planning to use a TP Power 3640 2100 KV/4S pack so a digital servo looks to be the nest choice.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •