Gents,

So yesterday I started making the linkage wires to steer my rudder on my 32" mono. I had purchased 2 used Airtronics servos on the board. I wanted them because they had ball bearings, metal gears, and higher torque.

I pulled each apart and treated them with Corrosion X and marine greased the cases to help weather proof. They both tested good on the bench as far as movement, no jitters.

Last night I hooked up the servo arm and linkage to the rudder. Plugged everything in, Traxxas RX and TX, Seaking 180 V2 and a 3s pack. Servo was working well, I started checking the throw left and right. The servo locked up and now I get nothing. Tested the second one without anything hooked up to it, seems good.

Did I burn it up or something? Just the dice I rolled buying used servos?

Ken