26" cat that I built

[kfxguy]

I thought I posted a build thread on this boat. Guess I didn't because one wasn't to be found. Anyway, I'll just post some info and pics about it and not a whole build thread. And a video from today.

I ran this thing a couple times. First time out on 2s it wouldn't get on plane. lol. Was disappointed to say the least. Was supposed to do around 50. Then I tried 3s. I think it went like 34mph. Lmao. Turd. Then I put in 4s. A whopping 47mph then snapped the flex. Wha?
Well the strut I had just wasn't doing it. So I had to machine a Speedmaster one I had down a lot smaller. Works perfect now and no binding. The other strut was getting super hot and I didn't know it till I bench tested it the other night. I was looking to get around 75ish on 4s with this little thing and I nailed it today on my first run. This is going to a fast and fun little dude once I get it lined out. Had a small prop on it too.


Tp3650 size motor
Sf220 esc
Spektrum servo
Home made .187 flex
Mbp collet
Mono Jeff custom battery trays
Mbp billet steering rod ends from ose
Speedmaster rudder and strut machined to fit
Heavily reinforced fiberglass hatch


Here it is as a bare hull. Beautiful little thing.




Here's the interior




Afloat




And a video. Not sure why I can't encode the videos anymore


https://youtu.be/TI87iKTV7GM


Gps pic






I don't know why but I have a thing for small boats like this.

[kfxguy]

Some more pics

[kfxguy]

This is 8 extra layers of glass on this hatch. It should be able to take a hard hit. I did flip it yesterday at about 70 and nothing.

[kfxguy]

I'll try to encode the video

[Beaux]

Slick boat, nice and clean inside. I'm trying to clean mine up, you do a fine job buddy.

[kfxguy]

Slick boat, nice and clean inside. I'm trying to clean mine up, you do a fine job buddy.

Thank you sir. Maybe one day I'll ride out your way and run a few of my boats with you. There's a few spots on the bayou a couple of my buddies run.

[Beaux]

Man sounds like a plan , I'm retired due to several major back surgeries . Every day is Saturday in my little world.

[kfxguy]

Man sounds like a plan , I'm retired due to several major back surgeries . Every day is Saturday in my little world.

Dang. You lucky. I had open heart surgery and I went back at work after 4 1/2 weeks.

[Beaux]

Yea some days work would be nice,Doctor said modify my life style so work was the first thing to go.

[kfxguy]

I've got quite a few more speed tricks up my sleeve for this little puppy. It'll be doing 80+ soon.

[Beaux]

Are you running 3s or 4s on that 3080kv motor?

[Beaux]

Are you running extra caps on this boat?

[kfxguy]

Are you running 3s or 4s on that 3080kv motor?

It's on 4s right now but propped down from what I was originally planning. I see myself having to back it down to 3s soon.


I'm using a castle cap bank that I removed the caps from and replaced them with 4 1000uf 35v caps. On my faster setups I always run caps. I've added caps before (went from 8 to 10 caps) and gained speed.

[Beaux]

I ordered the castle cap bank from OSE good up to 12s, so 4s should be all right with a 2200kv and m442 prop for a little sport n speed right?

[Beaux]

I ran it on 3s yesterday with a 3665mm 3100kv 40 mm prop it did ok. I feel the boat's to big for a 36mm it'll be better when my 40mm gets here.
How important is it to place the caps as close as you can to the esc?

[Beaux]

Hey I did some reading and figured the cap question out . Thanks.

[kfxguy]

I need to make a correction. I measured this hull for Darin last night and it's actually 27" long and 8" wide.

[Brushless55]

Oh look at you building another sick fast boat !!
I really wish I had someone in my area who could build boats like you Travis

[kfxguy]

Oh look at you building another sick fast boat !!
I really wish I had someone in my area who could build boats like you Travis

We gonna build you a nice one soon....

[kfxguy]

I made a few changes. I checked my cg and it was a bit further back than it should be. I'll just move the batts up a little and it puts it where I need it. Kinda going off of its 98mph bigger brother.

I also added an air dam. Some people say a drinking straw is fine. Well I don't want a drinking straw taped to my boat so I taped a piece of carbon tube. Matches the hull nicely.

[Brushless55]

We gonna build you a nice one soon....

Right on man!
by the way I think my emails now work. LOL

[kfxguy]

I decided to go make a test run today after making a few slight changes. I was praying for about 80mph. I had no idea that it was going to pick up so much with the few things I did. I was able to get on it all the way too as the air dam kept it glued to the water. It was unbelievably stable. When it ate up the whole lake in a matter of seconds I was in disbelief. I knew it went fast but didn't expect this. It was one of those passes that you know it's so fast you say holy sheet!

[kfxguy]

I decided to go make a test run today after making a few slight changes. I was praying for about 80mph. I had no idea that it was going to pick up so much with the few things I did. I was able to get on it all the way too as the air dam kept it glued to the water. It was unbelievably stable. When it ate up the whole lake in a matter of seconds I was in disbelief. I knew it went fast but didn't expect this. It was one of those passes that you know it's so fast you say holy sheet!

[kfxguy]

And a closeup so you can see the mh for miles per hour and not kilometers per hour lol

[Brushless55]

kph... LOL

[kfxguy]

kph... LOL

You wish! Lol

[martin]

Glad to see you decided to use an air dam, great results.

[kfxguy]

Glad to see you decided to use an air dam, great results.

Thanks. I've been against it but a buddy kept insisting it try it. I'm glad I did. My other fast cats will be getting one too

[kfxguy]

I wanted to add that it took me only 4 runs to get it to this speed. The first two I don't count because the first run was a function test in very rough water, second run was rough water again but I decided to make a go anyway and snapped the flex. Next run was 74.8 and 4th pass was 92.1 Pretty impressive for not having any tuning time on it.

[Beaux]

Fast, are you running a .187 flex?