Whoa... COOL!
Whoa... COOL!
Ok guys I got some good stuff for you. I was able to go run this thing today and I'm glad I did. It was actually rougher than I like to run boats this fast in but forged ahead anyway. On 4s it handled like a champ. I was looking for 50ish but I haven't done any adjustments so I'll take the 42.7mph it did plus it handled unbelievably well. I think put a set of not fully charged 3s packs just to see what it will do on 6s. It did 70.7mph without a problem. In this sort of wind and chop I expected it to be unrunnable but I was proved wrong. Here's 4s
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was
Here's the 6s run. I didn't try turning it because I felt it was a little rough for that.
This boat is all stock down to the props. The only thing I did was spend about 10 minutes lightly sharpening them.
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was
The stock props on this boat are actually quite adequate for the power systems, as Travis shows here. I think on 4S, you'd definitely need something with more pitch, but with the lower torque motors, 6S is going to be your friend with the smaller props. Your speed is coming from RPM, not from having an abundance of "power".
I fully prepped a set of stock Zelos props, as well as a set of X442s, which is what the stock props are based on, for us to try at the 2-Lap coming up. The X442s will allow some "bending" to take place, plus I backcut these and detongued them about 0.100, so they are basically backcut M442s now. Should be interesting to see how they perform.
20160228_162903.jpg
20160228_215020.jpg
20160228_134033.jpg
Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."
I tried a pair of 1615's on it and it easily went 50 at half throttle or less but if I tried to push it, it flipped over from the bow lift (lack of transom lift for the hardheaded old school guys lol) if I tried to get on it. I could have angled the props down a little but I don't want to change anything just yet. I think with fully charged packs and calmer water I can get 73+ out of it still being stock. I want to see how fast I can go with it stock.
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was
Good Job Trav. Your time and effort is appreciated.
Rafael Lopez
Product Developer-Pro Boat
My Facebook https://www.facebook.com/profile.php?id=100010183246751
O btw, good news. When daylight savings hits, I'll be able to hit the lake after work a few times a week and in the evening the water is usually calm.
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was
Looks beautiful there, we're patiently waiting for the ice to melt lol 50s all week should help
That looks like some thick water too. I wouldn't be surprised if you saw higher speeds in "cleaner" water being that there would be less drag on everything. I've seen 1-3 MPH difference between the 2 places I run. One is nice and clean and the other you can nearly spoon the water out. Doesn't help that the lake is nearly evaporated away now
Rafael Lopez
Product Developer-Pro Boat
My Facebook https://www.facebook.com/profile.php?id=100010183246751
Man the weather has been awesome. I don't think we had I've 20 cold days here this winter.
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was
Ya a week ago sunday it was 55 here and that following Tuesday it snowed 6" lol good ol Wisconsin
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Yes you need to! This is the best quality rtr boat I've seen so far. I haven't seen any other rtr boats hit 70 with ease like this boat.....at at this price point....nothing compares. This is no chea rtr layup either. Just wait till a few guys get theirs in.....
Ivebeen thinking about this thing all day after running it yesterday. I feel confident with a prop swap, 80 is doable with stock electronics. If you wanna go faster, it won't take much at all. I had a pair of 1715's but I'm not sure where my regular rotation one went to. I've looked all over and can't find one, so I text Chris (Dasboata) today and luckily he had one. So it's on this weekend! I think it's gonna like the 1715's. We shall see.
What I have to try now in props are three different things. Actually have four different sets but I think one set may be too aggressive. I have
1615's
1715's
And the new 1814's all in 17 rake. I also have some 1815's but Those are the ones I think will be too much
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was
Little off topic but what kind of balancer do you use to do your props? Thanks
Mine doesn't appear to be made any longer, but it's not dissimilar to this one:
http://www.offshoreelectrics.com/pro...prod=ose-80310
ose-80310.JPG
Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."
I use the top flight. I also have an integy one and it's not as accurate as the top flight.
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was
I have a Dubro balancer and also have an Aquacraft one I bought years ago. I use either, depending which one it at my reach.
Rafael Lopez
Product Developer-Pro Boat
My Facebook https://www.facebook.com/profile.php?id=100010183246751
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Thanks for the info Darin Rafael and Travis
Rafael Lopez
Product Developer-Pro Boat
My Facebook https://www.facebook.com/profile.php?id=100010183246751
That's a beautiful sight! When are they shipping?
Will they be inspected before shipping to the customers?
wow!
Getting through QC this week. Will start shipping next week.
We check the quality and function of a specific amount of boats, based on the amount received. Unfortunately it's impossible to check every single boat in the container.
As always, if anything is missed, our wonderful and helpful Product Support Department will take care of it.
Rafael Lopez
Product Developer-Pro Boat
My Facebook https://www.facebook.com/profile.php?id=100010183246751
Awesome! Can't wait.
Bookmarks