Results 1 to 3 of 3

Thread: Faster brushed motor

  1. #1
    Join Date
    Jul 2015
    Location
    Ca
    Posts
    635

    Default Faster brushed motor

    Well I thought the flex shaft was making the noise but it's the brushed motor ,probably got to hot pushing in my boats ,it's a 24t,what's a little faster motor that anyone would recomend? Maybe 12t?

  2. #2
    Join Date
    Mar 2011
    Location
    BC
    Posts
    7,332

    Default

    The lower the turn the higher RPM. I have been looking into this subject as of late for my mahogany boat. Look at the motors on Holmes Hobbies and you should get some ideas and even KV's if you dig up their descriptions enough.
    I think I read that a Titan 12T is like 3000kv

  3. #3
    Join Date
    Apr 2007
    Location
    AZ
    Posts
    7,634

    Default

    If a 24-turn motor burned up, a 12-turn will be 'way too hot unless you go to smaller props or shorter gearing. Too, going too strong on the motors will trash the drive train. Be conservative....


    .
    ERROR 403 - This is not the page you are looking for


Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •