Results 1 to 6 of 6

Thread: Etti demon rigger minimum servo tq?

  1. #1
    Join Date
    Oct 2013
    Location
    la
    Posts
    8,723

    Default Etti demon rigger minimum servo tq?

    Building two etti demons. The servos I have right now are causing installation issues because of their thickness. I was going to use hitec 8775mg servos. They have 100 oz in tq. Do I need that much? Or can I use the little savox micro waterproof servo?
    32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was

  2. #2
    Join Date
    Nov 2012
    Location
    De
    Posts
    353

    Default

    In my Etti Demoni used a Hs524mg servo


    Sent from my iPhone using Tapatalk

  3. #3
    Join Date
    Oct 2013
    Location
    la
    Posts
    8,723

    Default

    Is that an old number? All I could find was a 5245mg servo....
    32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was

  4. #4
    Join Date
    May 2009
    Location
    RO
    Posts
    742

    Default

    Anything above 3kg torque will be enough. The last time I installed a Turnigy metal body mini digital (not very good, the casing has an opening and it takes water...) and it was more than enough. Just don't go crazy with the rudder: it likes a shorter wider blade.

  5. #5
    Join Date
    Nov 2012
    Location
    De
    Posts
    353

    Default Etti demon rigger minimum servo tq?

    WOW that was bad gramma haha. HS5245MG servo


    Sent from my iPhone using Tapatalk
    Last edited by StevenBryant; 12-16-2015 at 02:55 PM.

  6. #6
    Join Date
    Oct 2013
    Location
    la
    Posts
    8,723

    Default

    Thanks fellas
    32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •