fs: ose carbon fiber motor and servo mount part#80995

[twonb1]

I bought this thinking it would work for a cat set up but I was wrong. Everyting is new, So my loss your gain.

40 shipped in the states

Carbon fiber rail style mount for 36mm diameter Motors.

Water cooled front mounting plate with integrated lay down servo holder.

Fits motors 36mm in diameter(depending on option picked) that are 74mm long and longer. For example Neu, Leopard TP and the other popular sizes. Additional rear motor clamp helps carry the weight of the longer 36 motors.

Angle is adjustable to allow straight alignment with propeller cable. The aluminum mounting plate with extended Carbon Fiber mounting stands to distribute the weight of the motor over a larger area. The mounting plates that have holes drilled in the bottom to allow epoxy to flow into them to make a superior bond to the hull. This mount works only with deep vees. If will not work with a flat style hull bottom, like a hydro/ rigger or catamaran.

[shua]

Price?

[twonb1]

40 shipped

[twonb1]

Bump 37.00 shipped

[Heath M]

It will work fine, just remove the stuffing tube holder. I use the same mount in my cat.

[twonb1]

Heath m you got any pics

[twonb1]

35.00 shipped