Quote Originally Posted by Leadfingers View Post
I drilled out the rudder inlets and the outlet on top to make them larger, along with a larger water lines and the splitter, not sure about pressure but it did increase the volume of water. I like having the water coming out on both sides of the boat, easer to see. I am going to try the stock connectors first and see how they do, upgrade later if need be.
Ok, Sounds like a great upgrade!
How is your strut adjusted?
I maby think that the boat would use less amp if it in stock posission?
Stock was the top of the strut plate goes in the same line as the top of the rudder mount..

Have read about that now, and my first stock run on 6s gave me good temp, but i saw it looks like it run to wet or have the strut to long negative since anyone says theas 29 proboat cat like the strut to be about 1-2mm over the rear of the sponsons..