OK Im not dealing with electrics well and dont feel the need to kill anymore batteries (IE-- cash down the drain)not knowing what im doing so here is my rigger
very well built predator rigger hull with CF spar epoxy finish- aluminum turn fin- solinger hardware- hextronix 120 esc (dp270 coated with larger plates novak cooling fan) 632 prop s/b/p, 1732 raw (casting flash removed) pixtix adapter- lehner xl5000- silicone cooling jacket from fullers- hobbyco MG servo (cs something) 1 tanic 4400 2s lipo (were two before the puffing)2 astro flight blinkys with thunder power adapters(2 each total) EXTRA cable and stub (can cut down to fit solinger strut and solder if buyer wants me to) solinger has brass bearing cartridge, no rx and TX with this BUT if buyer needs one I have a JR python AM tx-rx that needs an antenna I can toss in making it 100% ready to run hell even the lipo pack is balanced and charged ready to go.. there is a complete build thread here on rumrunners, hull looks good on and off the water ran one time-
not one thing was hurt by running it one time except the puffy pack and if ya want it to its available for local pick-up only LOL
400$ paypal will ship to the lower 48 states only UPS tracking number will be provided along with insurance for the sale amount only
Debating on making my DF33 nitro or just selling it to have not decided on it yet
last picture is straight off the bench with all bench settings it needs strut adjustment but was quick (before the thermal and puffing) didnt have any time to do much more than get the rudder dialed in on my tx before she cut off..I took fresh pics of the boat just to show nothing was messed up in the hull just the one pack.. in the back ground is the JR am radio that if wanted can be tossed in to the buyer---
Bookmarks