Results 1 to 2 of 2

Thread: D-19 Outlaw Racing June 6/7 Recap

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Apr 2007
    Location
    ca
    Posts
    6,963

    Default D-19 Outlaw Racing June 6/7 Recap

    Brief recap :

    Big turnout - @220 boats ; 2 FE classes -

    Saturday PLSH (nine entries - two flights)
    Sunday P-Mono (seven entries/one scratch)

    Busy pits :

    https://www.youtube.com/watch?v=wM4CO1XmDE8

    The usual FE suspects :

    outlaw d19 race 6-6-15008.jpg




    Making a Cameo Appearance, the Ex-Smock Racing MarinePower packs still kicking...

    outlaw d19 race 6-6-15011.jpg

    First Place PLSH : Jim Johnson

    First Place P-Mono : Ray Presnell

    First Place GX-1 Mono : That Ray guy again

    If there was a "Heater Award" like at Winter Warmups, Mr. Presnell would have won hands down (He'll have to settle here in L.A.for the SCFE Donut give-away)

    Ray's gas Mono in Open Oval holding off Henry Velasco's Big Block G5 Hydro for a few laps :

    https://www.youtube.com/watch?v=GGIMM1w_3eA


    Not shown was Ray's Gas heat where he flamed out at the mill, got back to shore, fired up, ran a full mill lap + 6 after the start, LAPPED the entire field for a first. UmmaGumma

    Other district news :

    Prior weekend the SCSTA race had Three FE classes qualified to ONE Thunderboat gas class. Now there's been accepted a P-Ltd Mono Class to be offered as well. Quite "electrifying" to say the least. I've said it before : D19 has the nicest racers there are and without reservation accepts FE as part of one big family.

    Final Thought :

    D19 Outlaw Sunday002.jpg
    Last edited by properchopper; 06-08-2015 at 04:38 PM.
    2008 NAMBA P-Mono & P-Offshore Nat'l 2-Lap Record Holder; '15 P-Cat, P-Ltd Cat 2-Lap
    2009/2010 NAMBA P-Sport Hydro Nat'l 2-Lap Record Holder, '13 SCSTA P-Ltd Cat High Points
    '11 NAMBA [P-Ltd] : Mono, Offshore, OPC, Sport Hydro; '06 LSO, '12,'13,'14 P Ltd Cat /Mono

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •