Results 1 to 2 of 2

Thread: turnigy 180 esc programming problem!

  1. #1
    Join Date
    Apr 2015
    Location
    FL
    Posts
    40

    Default turnigy 180 esc programming problem!

    I just got my new turnigy 180 and trying to program it with a card and all it does is beep!! is the card bad or something else wrong? It seams to work when I try and do it with the transmitter and beeps but not certain all is right that way. Please any info would be much appreciated. Thx

  2. #2
    Join Date
    Apr 2011
    Location
    CA
    Posts
    5,666

    Default

    Quote Originally Posted by Dominick View Post
    I just got my new turnigy 180 and trying to program it with a card and all it does is beep!! is the card bad or something else wrong? It seams to work when I try and do it with the transmitter and beeps but not certain all is right that way. Please any info would be much appreciated. Thx
    Is this the one? http://hobbyking.com/hobbyking/store...r_Cooling.html
    You need a female to female servo wire to connect between the ESC and the program box. If you look closely, you will see a port where there are three exposed pins, that's the spot you hook up the special wire. This is the wire which I am referring to:http://www.kintecracing.com/ESC_s.html ( 3rd and 4th item down the page)
    The old version (V2) you could have connected directly between the ESC's wire and the program box, but not on V3.
    Last edited by tlandauer; 05-29-2015 at 04:09 AM.
    Too many boats, not enough time...

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •