Results 1 to 4 of 4

Thread: Venom EKOS - I want specific motor, esc, prop, collets, etc for upgrade

  1. #1
    Join Date
    Dec 2012
    Location
    CA
    Posts
    1

    Default Venom EKOS - I want specific motor, esc, prop, collets, etc for upgrade

    I know there are a lot of threads about different upgrades but I'm looking for a specific shopping list of what I need to buy to make this work. I currently have 3S LIPOs.

    I have heard the Leopard 2860 motor. Which KV do I order?
    SeaKing 120 ESC - this seems straightforward
    Which prop?
    Which collet/connector do I need to connect the Leopard motor to the stock flex shafts? Or do I need different flex shafts?
    Any part that I'm missing?

    Thanks for the guidance.

    -Brian

  2. #2
    Join Date
    Jun 2010
    Location
    CA
    Posts
    147

    Default

    This is what I used in my Venom 34" EKOS C1:
    • Motor: Leopard 2860 2730kv 4-pole brushless inrunner
    • ESC: SeaKing 120
    • Prop: Graupner grp-2317.40, grp-2317.40L 1.4x42mm
    • Flex shaft: Stock should do. I think the flex shaft dia. is .150in, so use that size 2-piece SS collet.
    • Battery: 3S to 4S.
    Pete


    Motley Crew, Impulse 31, Zonda Cat, Genesis, Aqua Rider tug, E-Revo Brushless, Slash4x4

  3. #3
    Join Date
    Jan 2015
    Location
    NS
    Posts
    26

    Default

    Well i just fried one of my KOF motor and esc,i will have to look at this combo recommended.

  4. #4
    Join Date
    Jan 2015
    Location
    NS
    Posts
    26

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •