Finally getting around to making a little progress on my proposed 1977 Miss Atlas. Have a basic mock-up, but you will have to excuse the sloppy looks. It will all sand out in the end. Need a little advice on strut height, should the power be moved fore or aft? Any thoughts would be nice. Also looking for a good rudder to get next. The current parts list are..ML Boatworks kit, Turnigy 1400KV outrunner, Turnigy 120amp esc, 445 prop (just for the mock up), Basic Duratrax batteries in the nose for the mockup...4s total. Boat as you see it is 4.75 lbs on the wife's pampered chef scale. Also looking to possible source a cowling without dropping ridicoulous(sp) money on it.
KIF_4495.jpgKIF_4496.jpgKIF_4497.jpgKIF_4498.jpgKIF_4499.jpg