Problem Calibrating/Programming ESCs With Hitec FM Radio
Guys, I can't seem to calibrate my ESCs as I have several Turnigy, Avionics Captain 45, and Castles. When I plug in an ESC to a fully charged LiPo, I get the beep. But, I can't get into calibration/programming mode with any of them. The steering servo works, but throttle doesn't. I've tried it with several receivers too - same thing. My radio is a Hitec FM Aggressor. I used to be able to do it, but it's been 5 years since I last ran a boat. I was able to calibrate the CC 120, but I couldn't repeat getting into the calibration/programming mode a second time to check.
Any ideas on what it could be and what I should do with the Hitec FM radio?...
Thanks
Mean Machine Cat: 9XL, 4S2P, CC120, M545 (50mph) -- DF22 Hydro: 8L, 3S1P/4500, CC120, x637 (49mph) -- M-1 SuperCat: 1521/1Y, 6S2P, CC240, x447 (61mph) -- SV27 Mono: stock setup, 14-cell/4200, x642 (42mph) -- Micro Scat Cat: 28-3600, 3S1P/2100, Turnigy 60, x430 (41mph)
Bookmarks