First time to deal with one of these ESC's. I can see that the two positive wires go together and the two negatives go together. Then I would solder them to the capacitor on one side and out to the other side for + and - ? My two questions are:
1. How do you join the two positive wires into one? To big to solder well together? I was thinking maybe I make up a Y connector and do it with plugs?
2. Should the one positive(after the "Y") go on to one of the solder pads for the capacitor and then a second wire go out to the batteries on the other solder pad for positive? Same for the negative. I actually have wired a castle with the capacitors, but they were soldered to the wire, but not terminated to the capacitor and back out like this might be?
3. Perhaps a picture is worth a thousand words on this one. Someone have pic of it set up?
The castle was in the picture just as a comparison for a friend.
Thanks,
Jim
Bookmarks