Interesting internal layout, still, I wouldn't have the ability to water cool it.
Too many boats, not enough time...
Thats a totally different version. The version sold by hk has the same layout as the castle.
http://www.etotheipiplusone.net/?p=3096
Here you go. Scroll down about 3/4 of the page. They are pretty much exact copy of the castle.
You can see how the fets are closer to the middle and the heatsink actually touches the metal bars beside the fets. I will beusing thermal rubber to better pass heat from the fets. I wanted to use copper foil since I happen to have a ton of it but that would short out the esc.I put an ohm meter on the metal strips and they are connected with the motor wires.
I took a look at mine. It looks like a leftover SF 200a wc plate is a great solution for the castles. I have some pics. When I get a chance to crop and load em I will show what I did.
Off the top of my head I dont think it does data logging.Its not a huge deal for me since the data logging on the castle units in general seem to have a reputation for being in accurate.There is a program card available for them. I wouldnt be at all shocked if the castle software works on them since its an obvious clone.
20150307_100011.jpg
I removed the little heatsink under the driver board. Moving the caps out of the way, the sf plate fits perfect.20150307_095930.jpg
It looks as though .5mm thermal pad on either side and the two pieces will be a perfect fit. All that's left is to mill out some fines on the other half of the HS for brass tube. Providing of course I don't come up with something better.20150307_100139.jpg
Ok here is what I came up. Unfortunately due to the small amount of travel on my tiny lathe it will be a huge PITA to mill out the fins. 20150307_150222.jpg
So I am going to use the stock fan only I will drill a couple large holes in the sink so the fan blows directly on the fets rather than just on the HS. The top half of the sink does a better job of contacting the fets then the lower half so doing it this way should actually work out quite well. It has thermal protection so should it not be enough cooling it will shut down. But honestly between the water plate on the bottom and the hs/fan on the top it should be fine.
Looking at the trackstar unit I should be able to do pretty much the same thing only with dual fans. The boat it will be going in can handle the tiny extra bit of weight. I just need to get my mitts on another SF cooling plate.
Thanks. I could do it if i really wanted. Just means milling so far and then undoing the vise and relocating the part to mill the rest. Its only a taig lathe so even setting it up for milling is a bit of a pain. I won,t do it unless I absolutely have to...
Very interesting...
Nortavlag Bulc
have you guys determined that it,s the same as a castle 240? I need one. thanks
so I hate to revive a old thread but did you mods to the xl2 work and are they still working
Take a look here,its more recent.https://forums.offshoreelectrics.com/...-on-Castle-ESC
Can this software be put on a memory stick and installed onto a PC with no internet connection?
I've tried and it will not install. It is possible my home PC is messed up regarding USB before I installed the Castle software on a stick.
Does the PC or laptop need to be connected to the internet to install software?
Thanks...
Nortavlag Bulc
Should be able too as long as you have the dongle thingy to connect it to your pc.
OK then my software is corrupted on the stick and my pc has an issue in device manager. I accidentally deleted something to do with USB in devices.
I'll have a PC hooked up where I am now soon. I'll D/l the software then and see if it will install.
Nortavlag Bulc
I haven't. Iirc the price isn't much difference and I prefer to have the real thing. Plus I like the castle data logging the best out of all the other names I've used. I guess stick with what I know kind of thing. I have one I'm building for my replacement Rivercat build.
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was
I noticed the TrackStar does not have a bec
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was
Bookmarks