My latest creation:
I used Lonewolf's design and had my way with it. In Canvas drafting program, I added an 25% to the tunnel width, 30% to the tunnel height and the slanted sides, made the deck flatter to make it easier to build and filled most of the thing with US composite foam.
I used that lightweight carbon paper to stiffen the tunnel, 1/8 balsa bulkheads and 1/16th inch ply on all skin. Sealed her up with epoxy and used Duplicor automotive paints. Found decals on the web.
She is 24" long by 11" wide... no ride pads yet and you may notice she kinda banks in the turns.
here's the video of windy day (10+mph) and good rollers at Jims place.
If there's interest I can start a build thread and share the plans for free.
Here it is:https://forums.offshoreelectrics.com/...-shocker-plans
Bookmarks