and the last two pictures
I'm curious to see the performance of theses big outrunners...btw nice and clean build..congrats.Gill
GO FAST AND TURN RIGHT !
www.grsboats.com.br
Hi Guys
here some news of the HPR 233
Yesterday it was maiden run.
I made only some short runs,because i used only 12s1p pro motor
First run with 74 mm props with1,25 pitch
https://www.youtube.com/watch?v=ec0qvLg_Hqw
second with ABC 2916-15-50 (74mm 1,6 Pitch)
https://www.youtube.com/watch?v=yIg-wO04Rio
and the third with Propshop 8015/2
https://www.youtube.com/watch?v=RYotojqLcb0
bye
mudl
Looks great on the water, keep bringing the updates!
Hi Guys
here some updates of the HPR 233 Torqstar.
After several test runs i decide to change the escs.
With the mgm's i had the problem that they only can run 19000 rpm with the Lehner Torqstar.
At 19000 rpm they cut off.
I made several tests with 14s and 12s lipos.Max was only 19000 rpm.
But i want to get more rpms because i don't want to drive bigger Props as 80mm and want reduce the torque on the Flexdrives and on the clutch.
The new escs are two brand new Schulze 40334
I hope that they will better work with the Torqstars.
I installed 2 plates left and right in the boat where the escs are fixed with screws.
The Motors got new cabels and new Motor couplers(the normal couplers are not strong enough)
new tests are outstanding
here some pictures
regards
mudl
That's very wired, I think the MGM will support 250k rpm on 2 poles so the motors would have to be around 22 poles to reach a max of 20k? Any settings on the controller that may have been overlooked? Either way, very cool build!!
Are those brass/steel LMT couplers?.
Last edited by nata2run; 05-31-2015 at 09:46 AM.
Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
"Follow someone's footsteps and you will always be a step behind"
Hi
i test several settings on the esc.Nothing helps.
The couplers are made by lehner
Hello Mudl,
I know this is an old thread, but what settings did you run with the MGM for the Torqstar motor?
-Tyler
Tyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WR
Bookmarks